UNSOLVED

lself

updated

23 years ago

L

lself

2 Posts

0

12830

March 4th, 2004 15:00

Swapping hard drives?

I'm more of a software person, and I don't know if this is even possible, so if I'm crazy, hopefully I'll give you a good laugh! 

I have a Dell Dimension system and a Dell Optiplex system for work.  Is it possible to PHYSICALLY switch/swap the hard drives between the two without disrupting anything?  The Optiplex has more software loaded on it that I use every day, but we need one of the computers to ship around to trade shows.  With the Dimension being so heavy, we'd rather use the Optiplex for this purpose.  I'm just trying to find a way to not have to reload a ton of different programs.

Thanks!!

Thanks!

  • 386

    0

    Posted March 4th, 2004 15:00

    If you are using XP as your OS then the short answer is NO. On every boot the OS checks the system hardware against a hash stored on the hard drive to see if they match. If there is more than 3 or 4 hardware changes you will be prompted to re-activate the OS. Since these are completely different systems the OS might not boot at all. Had a similar situation happen to me and the OS wouldn't even boot. I hope you can find a better solution than this.

    Hope this helps

    Dimension XPS Gen2
    Win XP Home SP1
    Intel P4 3.2Ghz HT 800mhz FSB
    2Gb DDR3200 (400mhz) RAM
    2 - 120Gb S-ATA HD 7200RPM 8Mb (non RAID currently) Intel ICH5R on-board RAID
    2 - 60Gb ATA133 HD 7200RPM 2Mb (RAID 1) on a
    Promise FastTrak TX2000 PCI UltraATA/133 RAID Card
    128Mb Radeon 9800 Pro Video
    SB Audigy2 Sound
    CD-RW: 48X/48X/24X; DVD-ROM: 16X
    DVD-RW DVD-4X/2.4X/2X CD-40X/24X/10X
    Ext USB 100Mb ZipDrive
    17" 1703FP LCD Monitor
    Intel Pro 1000 Ethernet
    56K PCI Data Fax Modem

  • volcano11

    2 Intern

    •

    27973 Posts

    386

    0

    Posted March 4th, 2004 16:00

    iself,

    Unless the motherboards are identical and all of the devices are indentical, you would have problems, because the chipset drivers and devices drivers would not be installed for the new hardware when the drive is moved to the other system.  You can probably overcome these problems eventually, but it would not necessarily be easy.

    Steve

  • 386

    0

    Posted March 4th, 2004 16:00

    Don't know about Win2K so I'll just keep my 2 cents worth to myself. Best of luck

    Dimension XPS Gen2
    Win XP Home SP1
    Intel P4 3.2Ghz HT 800mhz FSB
    2Gb DDR3200 (400mhz) RAM
    2 - 120Gb S-ATA HD 7200RPM 8Mb (non RAID currently) Intel ICH5R on-board RAID
    2 - 60Gb ATA133 HD 7200RPM 2Mb (RAID 1) on a
    Promise FastTrak TX2000 PCI UltraATA/133 RAID Card
    128Mb Radeon 9800 Pro Video
    SB Audigy2 Sound
    CD-RW: 48X/48X/24X; DVD-ROM: 16X
    DVD-RW DVD-4X/2.4X/2X CD-40X/24X/10X
    Ext USB 100Mb ZipDrive
    17" 1703FP LCD Monitor
    Intel Pro 1000 Ethernet
    56K PCI Data Fax Modem

  • lself

    2 Posts

    386

    0

    Posted March 4th, 2004 16:00

    Thanks -

    A few more details - the Dim is running Me (ugh) and the Opti is running 2K.   Both are P4, with 1.6 (D) & 1.7(O) Ghz; 256 RAM, 40GB HD...  I had hoped that being so similar, it would work.  I would reformat the drive in the Opti going forward.