Installing new Hard Drive: Bios can see it, but WinXP installer can't |
Dimension 8400 | WinXP
I usually leave my machine running all the time, but I recently left for a trip and shut everything down and unplugged it all. When I came back, the machine went straight to BSOD. I ran some tests and it looked like my master HD was dead, so I put in a new HD. So far so good (except for the part where the machine is hosed, though I do run backups all the time, so my data is safe.)
So I inserted the WinXP cd to reinstall, and when it got to the part where I usually re-format the drive, it said it couldn't find any drives (though there should be two of them). I checked in the BIOS, and BIOS can see both drives. I ran the hard drive diagnostics from the boot device menu (after pressing f12 during startup) and it gave both drives a "pass."
Any reason BIOS could see the drives, but WinXP installer can't?
A follow-up: I've been reading about similar issues around the interwebs, and after looking at the capacitors on the motherboard, there are several of them that are swollen and one is actually leaking a bit.
So: any ideas of where to get decent replacement motherboards?
You can either call, Dell Spare Parts
here, or buy a Dell OEM 8400 motherboard from
here @ $149.99 Free S&H.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
bomo
3 Posts
322
0
Posted September 9th, 2008 02:00
A follow-up: I've been reading about similar issues around the interwebs, and after looking at the capacitors on the motherboard, there are several of them that are swollen and one is actually leaking a bit.
So: any ideas of where to get decent replacement motherboards?
Thanks again!