This just started today and I have made no changes to my system in months.
I docked and powered up and was trying to run some software but there was no drive listed. I checked my device manager and somehow I now have IRQ conflicts between my com1 and my secondary IDE channel. I tried disabling my com ports in the BIOS and nothing. If I undock it works fine.
Did you have any luck with this? I am having the EXACT same problem. I tried moving the Com1 IRQ to 3 instead of 15 where the conflict was, and it did not work.
I think whatever it is we got it at the exact same time. I have not tried undocking to see if it resolves the conflict.
Let me know ASAP if you get any info on this please!!! Where are the Dell people when you need them?
The only way I've been able to get around it is to start windows and then dock. It will then give the docked com port and different IRQ and the CD will still work. I wish I had a better answer but this works until we get someone from Dell to tell us how to fix it.
Thats the conclusion I came to. Someone else in my office has the exact same computer as I. They have a hard drive in place of the CD which seems to be working right now. I borrowed his CD drive and had the same old issues so its not that device.
Yep, Still having the problem, but only when I start the computer while docked. Undock, start the computer, then dock it and you wont have problems. Wish I knew more, but I really havent looked in a long time for a resolution. Sometimes its easier to just deal with it than wasting work time to deal with a problem nobody seems to be able to fix.
Good luck, Post again if you find anything. I will do the same.
Well, its been quite a few months, and I am still having the same problem. Cannot dock and then turn on the computer, otherwise I will not be able to use my CD drive. Now I find that if I turn it on before docking, wait for the login screen then dock, sometimes I get a fatal error. I send the error report almost every time and the automated trouble shooter says its something to do with a device driver but it cannot pin-point the specific cause. (can you say DUH) Anyway, It says to do a system restore but I dont want to lose any other info I have gathered along the way since this happened a long time ago. I dont believe it had anything to do with new software or hardware since none was installed at the time of the initial problem.
Hopefully someone has gotten some resolution on this one.
I have a client that has this exact same issue. After dealing with Dell tech support through 3 phone calls, they conceded that I needed a new motherboard. Luckily it was still under warranty. I'll keep you posted as to whether this actually solves the issue.
Thanks for the info! I think I have read elsewhere that others have tried this and failed, but I hope it works. I dont think mine is under warranty any more.
percman24601
117 Posts
573
0
Posted February 4th, 2005 19:00