In your Bios, under Boot Devices, do you have a listing for "Option ROM" ?
Take a look at this THREAD, and pay particular attention to Timdrouilard's fourth reply. Even though the thread deals with a B600r, you situation could possibly be similar.
I do not have the card yet. I do not want to buy it if I cant use it. I heard on futuremark that there is no way for a dell to boot off of a card... That is really sad if it is true, I didn't spend $3600 on a computer that I couldn't upgrade. That is sad because a $399.99 emachine can do it...
How do you expect a card to show in the bios, if you don't have it installed ? Sounds like your getting all bent out of shape before you even start. I haven't heard of anyone not being able to install a ATA PCI card in a Dell . Bookmark my link and save it for when you do get around to installing it. Betcha it'll come in handy. Have a nice day.
Hey, Thanks for your reply. Yes, I do not have the card, but I am also very computer smart. I have an MCSE, A+, and Network +, I have also been doing computers since I was 6. Every BIOS I have EVER worked with has had an option under boot devices for "SCSI/IDE CARD." This Dell BIOS has it nowhere. It shows up after you add the card or something? I am looking under "BOOT SEQUENCES" in the bios, but there it isn't very helpful. I am putting the card in right now, I went to the store and bought one. I will brb.
I got it to work! Ok, I took EVERYTHING off the onboard IDE, and only put the hard drive on the promise controller, then I did the ALT E F B bios reset thing, and then it booted off the hard drive off the card on next reboot. Auto configured it. Then I used the links and information above to configure the rest of it, is working good now.
@admiralj wrote:
No go. Same problem i predicted. I called Promise, turns out Dell CONSUMER computers can't boot off of PCI ide cards. Oh well, waste of cash =/
That's total BS. MY B600r boots fine off the card, as did my D333, as does my XPS. All of them boot just fine.
The B600r boots exactly as was explained to you earlier, using the Option ROM. You should stop predicting failure and listen to people's suggestions.
I got it to work! Ok, I took EVERYTHING off the onboard IDE, and only put the hard drive on the promise controller, then I did the ALT E F B bios reset thing, and then it booted off the hard drive off the card on next reboot. Auto configured it. Then I used the links and information above to configure the rest of it, is working good now.
Thank you everyone!
Glad to have helped, but you didn't need to reset the bios. As you've discovered, people on this forum often know more than support staff at places like Promise
Warren H.
501 Posts
373
0
Posted January 20th, 2004 18:00
admiralj,
In your Bios, under Boot Devices, do you have a listing for "Option ROM" ?
Take a look at this THREAD, and pay particular attention to Timdrouilard's fourth reply. Even though the thread deals with a B600r, you situation could possibly be similar.