I am thinking of upgrading my hard drive - can anyone recommend which software would be best to clone my existing harddrive so that I dont have to reinstall all my software etc.?
Hi - I have an Inspiron 8200 and upgraded the hard drive a couple days ago. It had a 30Gb drive and I bought a 120Gb drive.
I bought Norton Ghost and used the copy disk to disk feature. From my reading on the internet, there are other software options (I bought mine at Staples and it was the only choice they had) such as Acronis, which is supposed to be quite good.
To make it simple, I bought a 2.5" IDE to USB external enclosure for $34 (may be cheaper ones but I live in an area with limited options for computer parts). The enclosure holds the new hard drive while you clone. It connects to your laptop via USB cable. I have a Belkin USB2.0 notebook card which fits into one of the PC card slots on the side of the computer. So, the enclosure was plugged into the 2.0 card which was plugged into the computer.
Everything went well and I now have a 120Gb hard drive. Make sure with whatever software you buy that you read up on it first to make sure you know which options to use while cloning. Norton Ghost has 9 options to tick off (or not, depending on what you are doing). Not sure what Acronis is like.
When your cloning is done, you can use your old hard drive in the enclosure as a backup or for extra storage.
hi ,you can get a free prog from seagate's site ,its called disc wizard ,does everything you need ,i used it it did a better job than ghost acronis paragon etc,its about 10mg download.
I also have an 8200 with a 2.4 ghz processor 768mb of ram(1x256mb+1x512mb) with a 60gb hd drive....i was wondering if i could buy the 120gb hd drive and add an extra 512mb to max it out at 1024...although on www.getpartsonline.com it says that the 512mb ram isn't compatible with the 8200...i also saw that there is a 1gb ram on the site... http://www.getpartsonline.com/dell-memory.html ...if anyone with mad guru skills could check this out and let me know if i could rock out an 8200 with 120gb hard drive, 2gb of ram, and a 2.4 ghz processor...let me know
Rasta_Vibration wrote:
I also have an 8200 with a 2.4 ghz processor 768mb of ram(1x256mb+1x512mb) with a 60gb hd drive....i was wondering if i could buy the 120gb hd drive and add an extra 512mb to max it out at 1024...although on www.getpartsonline.com it says that the 512mb ram isn't compatible with the 8200...i also saw that there is a 1gb ram on the site... http://www.getpartsonline.com/dell-memory.html ...if anyone with mad guru skills could check this out and let me know if i could rock out an 8200 with 120gb hard drive, 2gb of ram, and a 2.4 ghz processor...let me know
Peace
In the future, by using the Advanced Forum Search on the bottom of this page, you can quite easily find the answer to this often asked question.
Didn't you ask the same question in a separate post?
Use the Crucial.com configuration and put in the Precision M50 and you'll see 2gb.
ejn63
11 Legend
•
87469 Posts
•
321256 Points
363
0
Posted September 14th, 2006 10:00