UNSOLVED

miro_gt

updated

7 years ago

M

miro_gt

1 Rookie

•

6 Posts

1

3334

September 8th, 2019 13:00

Precision 7520 screen flickering issue - Xeon 1545M v5 - Iris Pro P580 (and NVidia M2200) - BIOS related - with solution

Greetings,

so it took me couple days to troubleshoot screen flickering issue on this laptop. After going through all driver related updates, and trying out drivers directly from Intel and Nvidia, and using DDU to uninstall any previous drivers, it turns out to be a BIOS related issue. This took one flicker when I was looking over the BIOS menus to figure out it is not software related.

Under the "Video" tab in BIOS there are 3 options:

- Enable Switchable Graphics - this one enables the integrated GPU, i.e. the Iris Pro P580 in my case. Otherwise the system sees only the discrete one, i.e. the NVidia M2200. Enabled in my case.

- Enable Dock Display Port Through Integrated - this one enables docking station DVI#1 or DP#1 interface to run external display over the integrated GPU when switchable graphics is enabled. I don't have DP on my docking station though. Enabled in my case.

- Discrete Graphics Controller Direct Output Mode - this one enables external monitors to be run over the discrete GPU only. Disabled in my case.

I've got a docking station with two DVI outputs that are connected to two Dell U2412M monitors, and what I see with the latest BIOS (1.15.x) is this:

https://streamable.com/50irk

(3 min video, copy and paste in browser address bar if it doesn't show as a link)

If I don't have the external monitors, the laptop screen would flicker similarly. So I had to flash the BIOS a total of nine times to get to a BIOS version that doesn't have this screen flickering issue. History of this as follows:

1.7.1 - shipped with the laptop, which is manufactured in March 2018. Updated to:

1.15.1 - the current version as of today, screen flickering noticed but could not be directly linked to the BIOS update due to windows 10 also updated to the last 1903 version, and display drivers updates followed as well;

1.14.1 - screen flickering issue. Had to update twice to this version as the first time Windows 10 automatically updated back to 1.15.1 after computer restart due to the Device Manager "System Firmware 1.15.1". Duhh I've updated that driver as well when I did the 1.15.1 BIOS update so now had to disable this in Device Manager so that windows doesn't update automatically back to it. Otherwise it should show as "System Firmware 1.0.0".

Note when downgrading BIOS, the Intel Management Engine (VPro) will not downgrade from later version, so every time I downgraded bios it failed with "ME Firmware EndUpdate Failed Error: 0x00002236". No worries, other things update just fine, but this particular one stayed as version 11.8.65.3590 through all BIOS downgrades.

1.13.0 - screen flickering issue, though not so frequent but still existent;

1.12.2 - screen flickering issue;

1.11.1 - screen flickering issue;

1.10.2 - screen flickering issue;

1.9.1 - working fine without screen flickering issue !!!

 

Please see what was changed between update 1.9.1 and update 1.10.2 that caused this screen flickering problem that carries all the way to the current last BIOS 1.15.1 for laptops that have the Intel Xeon 1545M v5 processors. I'm certain that this relates to the higher level integrated GPU (Iris Pro P580), so likely laptops with Xeon 1575M v5 could also have the same issue.

I've got screenshots of all BIOS downgrades, I can post in case there is an interest for these.

On the bright side, I've got another Precision 7520 at work that has Xeon 1505M v6 with P630 integrated GPU that works just fine over the 1.13.0 BIOS that I believe came with the laptop. I haven't updated that one with the newest BIOS yet.

  • miro_gt

    1 Rookie

    •

    6 Posts

    2645

    0

    Posted October 9th, 2019 18:00

    Hello,

    Can I expect a fix for this in the next BIOS release, after I pointed where to look for the problem? Asking as there's no reply to this post yet. Nonetheless this is top of the line model that came with premium price tag.

     

    The problem started with BIOS 1.10.2 update, and what was changed was this:


    Fixes:
    - Fixed incorrect Windows operating system logon message.
    - Fixed system password not prompted when booting the system with NVMe SSD.
    - Fixed Legacy PXE boot issue that affected the Dell USB-C Mobile Adapter - DA300.
    - Fixed Blue Screen of Death (BSOD) error code 0xA5 in Windows 7 32 bits.
    - Fixed serial port device on legacy dock is not functional.

    Enhancements:
    - Supported selectable MAC Address Pass-Through feature in BIOS Setup.
    - Enhanced SMM Security Mitigation feature.
    - Updated Enhanced Pre-Boot System Assessment (ePSA) firmware.
    - Updated Realtek USB LAN firmware.

     

    Thank you.

  • c99kfm

    1 Message

    2251

    0

    Posted May 15th, 2020 00:00

    Problem and solution (downgrade BIOS to 1.9.1) confirmed with BIOS 1.17.0 on a 7520 with Xeon E3-1545M v5 only iGPU (Iris P580) only, on both laptop screen and external monitor connected over HDMI.

    Flickering is as good a descriptor as any, my "feeling" of the problem is that it involves how the video buffer is handled - occasionally, parts of the screen (possibly from the next or last frame) are displayed on other parts of the screen.

  • robneva

    1 Message

    2036

    0

    Posted August 14th, 2020 20:00

    I have this same issue

  • jayhuge99

    15 Posts

    858

    0

    Posted May 18th, 2022 16:00

    Great post, and a good example of why "latest" drivers aren't always "the best" ... imo

    I was experimenting, trying to see if I could access any GPU power options in the Bios on my Dell 7510 by downgrading (I could not!) so I downgraded from latest Bios 1.25.x back to 1.06.x

    Comments -

    - A CMOS battery reset will clear all Intel Chipset drivers, allowing you to install an earlier version of Intel ME and Intel DPTF (performance/power/heat) drivers

    - "Somehow" the older 1.06 Bios version lets me undervolt/overvolt the Xeon E3-1353M v5 voltage via Throttlestop, and I'm 99% sure this is locked down by latest Bioses. I have underclocked succesfully as a trial

    - Also with the QuickCPU app, I can boot my 7510 with Speedshift enabled (Intel hardware-level CPU throttling) and Speedsteep disabled (Intel software-level CPU throttling) ... this seems to affect system responsiveness in Windows, browsing etc as the CPUs throttle faster up to a boost-level (3.6 Mhz vs 2.9 MHz core). Also seems to use CPU power more efficiently

    Speedshift vs Speedstep depends on whether Speedshift was built into your CPU so I cannot vouch for other CPUs. There are no Dell Bios options for SpeedShift on the Precison 7510 but both Throttlestop and QuickCPU will reveal this capability and allow it to be used, regardless of your Bios. But 1.06 Bios lets me boot with Speedshift set ON so I don't have to think about it