bmerfeld

updated

4 years ago

B

bmerfeld

2 Posts

0

390

August 4th, 2022 11:00

MD3220i, ME4024 and best practices

Good afternoon,

I've been reading conflicting information, and I can't seem to decide if I have things setup properly or not.

We have a MD3220i (2 controllers, 4 NIC per controller). We also have a ME4024 with the same Controller and NIC Count. We have 2 PowerConnect switches. Here's how I have everything addressed and cabled.

Does this seem ok, or is there a better method to get better performance?

MD3220i

Controller 0 - NIC 0: 192.168.130.16 -> switch 1

Controller 0 - NIC 1: 192.168.130.17 -> switch 1

Controller 0 - NIC 2: 192.168.131.16 -> switch 2

Controller 0 - NIC 3: 192.168.131.17 -> switch 2

Controller 1 - NIC 0: 192.168.130.18 -> switch 1

Controller 1 - NIC 1: 192.168.130.19 -> switch 1

Controller 2 - NIC 2: 192.168.131.18 -> switch 2

Controller 3 - NIC 3: 192.168.131.19 - > switch 2

ME4024

Controller 0 - NIC 0: 192.168.130.20 -> switch 1

Controller 0 - NIC 1: 192.168.130.21 -> switch 1

Controller 0 - NIC 2: 192.168.131.20 -> switch 2

Controller 0 - NIC 3: 192.168.131.21 -> switch 2

Controller 1 - NIC 0: 192.168.130.22 -> switch 1

Controller 1 - NIC 1: 192.168.130.23 -> switch 1

Controller 2 - NIC 2: 192.168.131.22 -> switch 2

Controller 3 - NIC 3: 192.168.131.23 - > switch 2

Thank you in advance!

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    311

    0

    Posted August 4th, 2022 23:00

    Hello @bmerfeld,

     

    You might want to review the deployment guide for MD3220i and ME4024. 

    MD3220i: https://dell.to/3Q5YLxg

    ME4024: https://dell.to/3BIxDzL

     

    I think there might be a typo on the controller numbering? In both of the deployment guide will show you an example of IP address and switch cabling for your storage hardware configuration (dual controller with 4 ports).

     

     

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.