UNSOLVED

Schepnet

updated

17 years ago

S

Schepnet

5 Posts

0

36735

December 29th, 2009 13:00

MD3000i Merge free capacity

Is there a way to merge two blocks of free capacity in a diskgroup to one block of free capacity?

  • cjtompsett

    104 Posts

    889

    0

    Posted December 29th, 2009 22:00

    With the SMcli utility you can "defrag" the space just as you described.

    -cjtompsett

  • Schepnet

    5 Posts

    889

    0

    Posted January 3rd, 2010 03:00

    Thanks! That was just what I needed.
    I wonder why the SM GUI doesn't have these kind of functions.

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    889

    0

    Posted January 4th, 2010 20:00

    The GUI is missing a whole lot of features that other SANs (even those offered by Dell themselves) can do in their management UI; e.g.

    - ability to grow a virtual disk

    - monitor progress on a process that the controller is working on (e.g. how far along is a virtual disk bind process)

    - add more than just 1 drive at a time to a raid 5 (or more than 2 at a time to a raid 10)

  • 889

    0

    Posted January 26th, 2010 11:00

    This is exactly what I need to do.. Grow a Virtual Disk into Free Capicity in a disk group.

     

    Where do I find this "SMcli utility"????

  • Schepnet

    5 Posts

    889

    0

    Posted January 26th, 2010 12:00

    You'll find it in the installation folder of Dell Storage Manager.

  • 889

    0

    Posted January 26th, 2010 12:00

    Thanks I found that out after posting... However it is harder than I thought as I don't know the syntax and smlci.exe /? is usefull, but I'm a newbie.

     

    Dell's site describing the utlity is down.  Do any of you guys have the PDF?  Here's Dell's dead link:http://support.dell.com/support/edocs/systems/md3000/en/CLI/PDF/CLIA00MR.pdf which was liked to from this working page:http://www.delltechcenter.com/page/MD3000i+Performance+Monitoring

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    889

    0

    Posted January 27th, 2010 07:00

    Here <ADMIN NOTE: Broken link has been removed from this post by Dell> is a link with all the MD3000 documentation from the support site. It includes the CLI guide in HTML and PDF format.

  • ebutash

    5 Posts

    889

    0

    Posted December 9th, 2010 08:00

    Smcli -n   -p -c "start diskGroup [diskgroupnumber] defragment;"

     

    Diskgroupnumber is a number that is entered.