We have recently bought a MD300i SAN. We are unable to connect a single host to different iscsi disks, it seems is not possible to add a host to different host grups, which I believe it would allow us to connect a host to several iscsi disks.
What is the correct way to connect a host to different iscsi groups?
Servers can't share disks in any SAN unless they are a cluster.
What are you trying to do?
If you need to move a LUN to a different server, go to the Modify tab, and select to change the lun mapping. Remove the lun from one server/group and give it to the server/group that you want to give it to.
A server doesn't need to be in a host group unless you're clustering. It's assigned disks as a stand-alone server. You're correct that you can't assign a host into multiple host groups - that would create big problems trying to run a host in multiple clusters. Just keep it as a stand-alone host and give it the LUNs.
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
163
0
Posted July 9th, 2008 11:00
What are you trying to do?
If you need to move a LUN to a different server, go to the Modify tab, and select to change the lun mapping. Remove the lun from one server/group and give it to the server/group that you want to give it to.