UNSOLVED

Jimkerry

updated

23 years ago

J

Jimkerry

2 Posts

0

14353

December 4th, 2003 20:00

Can I upgrade my PV725N to add the Hardware RAID controller?

My company purchased a 480GB PV725N before the hardware RAID controllers were offered.  I have heard rumors that this will significantly improve RAID 5 performance. 

1) Does anyone know where I can find some data or a test report that shows the gain (need to justify to my boss)?

2) Can I upgrade and if so what is the part number?

Thanks,

Jim

  • bpassmore

    1 Message

    322

    0

    Posted February 11th, 2004 14:00

    I need the same thing. Dell, please respond.
  • davjay

    2 Posts

    322

    0

    Posted February 12th, 2004 08:00

    Hi!

    This would be extremely interesting, since I'm considering dropping the SW RAID servers to HW IDE RAID of a different brand.

    Please respond Dell about an upgrade.

    /Dave
  • TCStudio

    6 Posts

    322

    0

    Posted March 31st, 2004 20:00

    I to would like to use IDE Raid as well as i have installed Netware 6.5 on my server and would like to make it even better by having IDE raid in raid 5 format. could i simple add a PCI IDE raid controller and cable this up to the four HDDS?
  • BlueHeeler

    38 Posts

    322

    0

    Posted April 2nd, 2004 12:00

    You would need to update more than just the IDE RAID controller.

    You would also need the cable (obviously) and the backplane that the hard drives plug into as it is different also.

    You can contact technical support for the part numbers and then speak to Dells Sales or Spare Parts department to order the parts.

    You may want to ask the support technician how this affects your warranty also so there are no misunderstandings

  • BlueHeeler

    38 Posts

    322

    0

    Posted April 2nd, 2004 12:00

    Actually, on this unit. If you look at the manual

    http://premiersupport.dell.com/docs/stor-sys/spv725n/en/sm/remove.htm#1045211

    You will see that the CERC Card plugs into the backplane. 

  • TCStudio

    6 Posts

    322

    0

    Posted April 2nd, 2004 12:00

    If you had a four channel ide card which on board had 4 sockets which hab cables running to each individual HDD PCB Plug board this is all you would need the power would come from the exist PCB although this would make the hot swappable functionality useless.

  • TCStudio

    6 Posts

    322

    0

    Posted April 2nd, 2004 14:00

    I have one on order and will leave a post once I have installed and got netware up a running