UNSOLVED

Nvdveen

updated

3 months ago

N

Nvdveen

3 Posts

0

2767

July 22nd, 2004 11:00

PE2600 Caution Led flashing - What do I do next ?

My recently purchased and installed Poweredge 2600 server is running Windows 2003 server.
The specs, in short, are: Perc Raid5, 1Gb memory, Single Xeon CPU, DLT tape unit (40-80Gb,, Powervault).
Software running on it is: Exchange 2003 server (standard).

About each day a moment arises when the server looses contact with the internet.
When I take a look at the server, the first thing I notice is a flashing led. The manual tells me it's a "Caution led" and
attention is needed. There are no clues, however, on where to focus the attention.
Usually a reboot fixes the problem temporarily, but rebooting a new server once every day seems a bit odd.

Now, troubleshooting the loss of internet-access is something I should be able to do myself.
I am very curious about the flashing led.
Can anyone tell me where to start looking as soon as this led starts to flash?
The System and Applicationlogs are clean, btw.

Thanks in advance!

Nick

  • NickFerrar

    41 Posts

    114

    0

    Posted July 27th, 2004 07:00

    If you have Dell OpenManage installed I'd check there to see if anything has been logged.
  • Nvdveen

    3 Posts

    114

    0

    Posted July 28th, 2004 08:00

    Thanks for your reply. Openmanage does tell me there is a parity error detected
    in one of the PCI-cards. The only PCI-card installed is an Intel Networkcard.
    So it appears the loss of internetconnectivity and the caution led are connected.

    Another question comes to mind; how can a standard networkcard get parity errors?
    I mean, if it's a net-bootable card it could mean that the onboard eeprom is bad.
    But as far as I know this card (Intel Server Pro 100s) does not have suchfunctionality.

    Anyway, I will report the error at Tech-support. Thanks again for thinking along!

    Regards,

    Nick