UNSOLVED

jhoggood

updated

3 months ago

J

jhoggood

11 Posts

0

6920

November 5th, 2004 13:00

PE2200 Hangs During W2K Install at "Setup is inspecting your computer's hardware configuration"

I have a PE2200 with latest BIOS A07 and an Adaptec 39160 with latest BIOS V3.10. when I attempt a W2K volume license install it immediately hangs at the "Setup is inspecting your computer's hardware configuration" message. If I disconnect the 39160 SCSI cable at the controller setup continues fine. If I take the 39160 to an Optiplex GX110 it works fine too so this rules out the 39160, cables, drives.
 
There would appear to be some sort of incompatibility between the 39160 and the PE2200.
 
Any ideas?