I have a T610 with the integrated PERC 6 I/R controller and want to upgrade to a H700 so I can add a second raid 5 array. Is it possible to migrate the existing raid 1 array to the new H700 Controller? and then configure the new raid 5 array?
What you would actually need to do is first get a good backup of the data, as you should always do when working with the array. After that you will install the H700 and then boot to the controller BIOS (CTRL-R at prompt) From there you will highlight the controller and hit F2. From the F2 menu you will select Foreign Config. In the Foreign Config menu you will select IMPORT FOREIGN CONFIGURATION. What that will do is tell the controller that the raid configuration information on the Disks is what should be used. It should then import the configuration to the H700. Ensure all the drives are migrated.
Let me know how it goes.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
I have a T610 with the integrated PERC 6 I/R controller and want to upgrade to a H700 so I can add a second raid 5 array.
Chris gave some sound advice, but let me come back to the "reason" for the upgrade: The PERC 6/i, like the H700, will easily support a second VD (RAID 5, whatever), so that would not be a valid reason (alone) for the upgrade.
Or did you mean the SAS 6/iR? The SAS 6/iR, while it also will support 2 VD's, it does not support RAID 5, and direct migration of disks/VD's from a SAS 6 is not supported on the H700. You would need to first install the H700 in the system to load the drivers in Windows for it, then power off and attach disks to it. Success rate varies, so be prepared with a backup. You could also use a backup/restore using software capable of restoring to different hardware - able to load the appropriate drivers
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
11929
0
Posted September 12th, 2014 11:00
Bigfoot53,
You can migrate the array from the Perc 6/i to the H700, as seen on page 9 of this link - http://www.dell.com/downloads/global/products/pvaul/en/perc-technical-guidebook.pdf
What you would actually need to do is first get a good backup of the data, as you should always do when working with the array. After that you will install the H700 and then boot to the controller BIOS (CTRL-R at prompt) From there you will highlight the controller and hit F2. From the F2 menu you will select Foreign Config. In the Foreign Config menu you will select IMPORT FOREIGN CONFIGURATION. What that will do is tell the controller that the raid configuration information on the Disks is what should be used. It should then import the configuration to the H700. Ensure all the drives are migrated.
Let me know how it goes.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!