RudolfH

updated

14 years ago

R

RudolfH

3 Posts

0

57108

March 25th, 2013 05:00

Perc H700 - unexpected sense

Hi,

Nagios (check_openmanage) is warning me about a harddisk which
needs attention:

Logical Drive '/dev/sdb' [RAID-0, 1862.50 GB] needs attention: Ready

Ive found these messages in the alert log (omreport system alertlog).

Severity      : Ok
ID            : 2334
Date and Time : Wed Mar 13 13:02:42 2013
Category      : Storage Service
Description   : Controller event log: Unexpected sense: Encl PD 20 Path 5882b0b04fdab300,
                CDB: 1c 01 07 00 20 00, Sense: 5/24/00:  Controller 0 (PERC H700 Adapter)

In another task of this support forum it is said, that
this error could be ignored, especially when using non-dell harddisks
(this is really the case).

Now I like to clear this error. I tried already to clear the
error.log and even to reboot. But the error reappears when booting.

And so Nagios (check_openmanage) is still complaining.

"omreport storage vdisks" shows:
...
ID                      : 1
Status                  : Critical
Name                    : Virtual Disk 1
State                   : Ready
Virtual Disk Bad Blocks : Yes
Encrypted               : Not Applicable
Layout                  : RAID-0
Size                    : 1,862.50 GB (1999844147200 bytes)
Device Name             : /dev/sdb
Bus Protocol            : SATA
Media                   : HDD
Read Policy             : Adaptive Read Ahead
Write Policy            : Write Back
Cache Policy            : Not Applicable
Stripe Element Size     : 64 KB
Disk Cache Policy       : Enabled
...

Is there a way to clear the error?

Best regards
 Rudolf

  • 1924

    1

    Posted March 25th, 2013 07:00

    CDB: 1c 01 07 00 20 00, Sense: 5/24/00

    This error is listed as an invalid request-invalid field in the Code Descriptor Block.   As far as I know there isn't a way to clear the error from being reported.   As you have stated, you are using non-Dell drives, so there is a mismatch in firmware between the controller and the drives that will complain and recieve errors as these.   You can safely ignore and continue deleting the logs as they accrue.

    Regards,

  • RudolfH

    3 Posts

    1924

    1

    Posted April 2nd, 2013 07:00

    At least I found a workaround. It is possible with check_openmanage to blacklist some Checks:

    check_openmanage -H myhost -b vdisk=0:1