Can someone please help me setup the Raid on PE1850 server.
If I do the following on start up: ctrl-m during post > configure > easy configuration, press spacebar. You should be able to select the two drives. Problem here is that you can't select the drives as it would say no drives to select. Also if I press F2 to see the information about the drives both of the drives show 0mb for capacity. Have replaced the drives and still no luck.
Have you tried the drives in different slots to see if they show any capacity?
Also, you may want to check the BIOS to confirm both RAID channels are set to RAID rather than SCSI though that should not have any effect on the capacity the drives display.
To check the RAID channels, go into the BIOS, F2 when you power on the server, then go to Integrated Devices in the BIOS to check the RAID settings.
How do you have the drives and controller connected? Also, what are the drives you are trying to use? Are they supported for the server and controller?
Let me know.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
Have you reseated the backplane connection yet? Also, is the server giving an amber light on it? Lastly, are you getting any drive lights with the drive installed?
Let me know.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
ImmortalMyrddin
10 Posts
589
0
Posted November 25th, 2013 06:00
Have you tried the drives in different slots to see if they show any capacity?
Also, you may want to check the BIOS to confirm both RAID channels are set to RAID rather than SCSI though that should not have any effect on the capacity the drives display.
To check the RAID channels, go into the BIOS, F2 when you power on the server, then go to Integrated Devices in the BIOS to check the RAID settings.