UNSOLVED

waydena

updated

11 years ago

W

waydena

6 Posts

0

32699

August 11th, 2015 12:00

Dell 2950 Perc 5/i integrated firmware update runs but does not update firmware

I have an older 2950 server with a PERC5/i integrated RAID controller and RAID firmware v5.2.1-004 and OMSA says this is lower than the required minimum of 5.2.1-0067. The server is running Windows 2003 R2, Standard, Service Pack 2.

I downloaded the 5.2.2-0072 upgrade executable and it appears to run without errors but the FW version is not updated. I tried rebooting the server but the FW still shows the same version.

The driver is version 2.23.00.32.

I also tried the FW update on another server with 5.2.2-0067 FW and the result is the same - the exe runs but the FW is not changed.

I also tried turning off the OMSA services (DSM...) and the re-running the update .exe but still no update.

I ran the diagnostics from F10 on boot up and it gives Error Code 2900:0221 System Firmware... which I guess is just telling me the same thing as OMSA - firmware version lower than minimum.

Any suggestions? Some other way to run the FW upgrade perhaps? (I am running as administrator).

Thanks, Wayne