
UNSOLVED
B
billbowling
3 Posts
0
132026
August 15th, 2014 06:00
Removing PowerEdge R610 from Rapid Rails
How do I remove a R610 from Rapid Rails? I know I could try to remove the rails from the rack but I am just trying to remove the server. Thanks. Bill
Responses (1)
Solutions (0)

DELL-Rey G
4 Apprentice
•
1068 Posts
7669
0
Posted August 15th, 2014 07:00
Bill, pull the server all the way forward so that the rails are fully extended. The release buttons to pull the server forward are on the front of the system on the far left and right, press them from the top and then pull with the same tabs. Once the server rails are fully extended, follow the rails to the very front of the system, right behind the bezel, you should see a blue release lever, lift that lever up, which will release the server, then tip the front of the server up. This Dell video will help make sense.
https://www.youtube.com/watch?v=nK9vfT-lCR0