UNSOLVED

StanF512_f1ecd9

updated

3 years ago

S

StanF512_f1ecd9

1 Rookie

•

4 Posts

0

436

September 28th, 2023 13:10

R730xd Supported PCIe NIC Cards

Where can I get a list of supported Dell PCIe NIC cards for an R730xd?

I tried a Dell 0557M9 in the R730xd, but it resulted in VERY high fan speed and unacceptable noise for our environment.  My understanding is that unsupported PCIe cards cause the server to run the fans at high speed.  I want to avoid this situation.

I could not find this specific information anywhere on Dell's website.  Is there a hardware compatibility list somewhere?

  • atafm2

    2 Intern

    •

    89 Posts

    0

    0

    Posted September 28th, 2023 16:56

    The Dell YGCV4 quad GBE and the Dell XT5PF dual 10GBE work in my 730xd's

    The reason the fans are stuck at 100% is if it is not on the compatibility list, the server doesnt know its thermal profile.

    You can just disable this behavior for unknown pci devices, and/or manually set the fan speed with ipmi.

    instructions can be found here

    https://www.dell.com/community/en/conversations/poweredge-hardware-general/how-to-quiet-r730xd-fans-lower-idle-fan-speed/647fa279f4ccf8a8de7fd4ad#M77434 

    Do note, that when manually setting the fan speed, if the temperatures exceed the warning threshold, it overrides manual fan controls to prevent critical temperatures 

  • StanF512_f1ecd9

    1 Rookie

    •

    4 Posts

    0

    0

    Posted September 28th, 2023 20:42

    Thanks, but I am looking for a Dell branded, supported card. 

    It's weird that Dell makes that information so difficult to find.  

  • Tusj

    1 Rookie

    •

    14 Posts

    0

    0

    Posted September 29th, 2023 07:35

    @StanF512_f1ecd9​ My products -> service tag -> parts and accessories -> networking.

  • StanF512_f1ecd9

    1 Rookie

    •

    4 Posts

    0

    0

    Posted September 29th, 2023 12:14

    Thanks, but that's not a hw compatibility list - it just gives a list of parts that Dell currently sells. 

    And there's no guarantee that it would be recognized and handled properly by the fan control firmware.  

  • Tusj

    1 Rookie

    •

    14 Posts

    0

    0

    Posted September 29th, 2023 13:15

    @StanF512_f1ecd9​ I’d assume the hardware listed as accessories to my specific server(s) was tested and working, but if you say otherwise. 

  • StanF512_f1ecd9

    1 Rookie

    •

    4 Posts

    0

    0

    Posted September 29th, 2023 17:22

    @Tusj​ you have more faith in Dell than I do.  Dell must have a list of compatible hardware - where is it?

  • atafm2

    2 Intern

    •

    89 Posts

    0

    0

    Posted October 3rd, 2023 13:18

    @StanF512_f1ecd9​ you have more faith in Dell than I do assuming such list exists haha

    if the nic has a dell part number it should (usually for pci cards) work in a dell server.

    If it does the weird fan thing, disable the weird fan thing behavior with the ipmi commands.

    simple as