AMAMSNL

updated

2 years ago

A

AMAMSNL

1 Rookie

•

14 Posts

0

7522

July 24th, 2019 08:00

Optiplex 9010 TM Bios update Fails "ANYONE A SUGGESTION!!"

I have an Optiplex 9010 with Windows 10 pro version 10.0.17134 build 17134.

Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz/NVIDIA Quadro NVS 450/16GB RAM

Virtualization Settings are off!

Windows and hardware are showing some random problems. I ran the Dell Support Assistant that urgently advises to update the Bios. So I let the support Assistant do its work and Update the bios A18 to A30.

After 5 update attempts and reboots I can see in MsInfo that update failed, no error messages it just fails.

I then created a bootable USB drive with freedos and tried to update under Dos. It appeared to go smooth, showing progress and all but again after reboot, the dos option also failed, no error messages though. BTW I tried several Bios Versions numbers but also that did not help.

Than I downloaded Dell Command Update, that also detected that I need a Bios update, it appeared to have updated the Bios by giving all the right messages, no error messages. but you have guessed it after reboot the update just did not happen..

I read about some problems with Intels Management Engine someone suggested to switch it off but that seems to be impossible for the average computer user.

The system also has a Intel Storage manager I tried to switch that of in the Bios or post bios screen (F12) but I need a password I cant remember ever having submitted a password for that.

I red that Virus scanners might be a problem? However since I tried under Dos my guess is that is not gonna help me, using MS Defender.

The main reason for wanting to upgrade the bios is that my Mouse and Keyboard are legging, mainly with Office 2016 (Outlook) but also with Chrome. any suggestions on that subject are also welcome!

Can someone help me out here? 

 

  • AMAMSNL

    1 Rookie

    •

    14 Posts

    6200

    0

    Posted August 16th, 2019 06:00

    Finally succeed to update the Bios with the latest firmware version A30 from A18 here is what I did:

    Somewhere I red somebody had similar problems on a different system he also had red somewhere that it could help to switch the memory modules.

    I disconnected all devices from my system including network and power. Opened the case took out any optional cards and memory modules. Took out the battery from the mainboard. Pushed the power button for another 5 minutes to make sure the motherboard was discharged. Assembled the system again, new battery, with only keyboard, mouse, network, monitors and power connected.

    I rebooted the system with F12 and booted from my Freedos USB stick. I chose to update from A18 to A19 worked like a charm as usual. The system automatically rebooted when it was done preparing I went into the BIOS F2 and what version did I see A18 the same F!5$^#*$%WK.

    I finished to setup the bios as the settings were wiped from the power discharge I set everything back to what it was. Rebooted into Windows and went online however the system freezed. I rebooted and Windows did some repairing while booting apparently something had gone wrong. I checked the device manager after boot and saw some problems with the display drivers. The system has a Nvidia Quadro NVS450 card. I renewed the drivers to the latest version.

    In a desperate attemp to update the bios I ran the A19 exe under Windows with all normal settings including virus scanner on. Everything went as I had done at least 20 times before. However when rebooted msinfo showed A19 bios ......

    I immediately tried A20 under Windows, virus scanner on etc... it worked however now the system was actually showing that it was updating the bios to A20 when it had rebooted.

    I then went from A20 to A25 and then A30 voila problem solved.

    Now lets see if my system indeed works better with the newest 2018 Bios.

    UPDATE:

    After using the system now for a couple of days and having only 1600mhz memory modules in the system it works great. Mouse/keyboard lag is gone, and also waking up the system from sleep state works again, like before i 1st had to shutdown the system 1st and then reboot.

    Thanks everybody for your help !!!!!

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    6276

    0

    Posted August 13th, 2019 18:00

    Did Dell Support Assist let you jump from A18 to A30 BIOS, or did it show you a couple of (may be a few) BIOS that needed downloading first?

  • speedstep

    11 Legend

    •

    46969 Posts

    6257

    0

    Posted August 14th, 2019 10:00

    You have to install XP to windows 7 and chipset and AMT HECI SOL and Management engine Drivers then run the Bios update in sequence you cannot jump from A18 to A30 in a single step.

    Windows 10 is not supported on this model and there are no windows 10 drivers for this model because it supports booting XP.

    Not supported does not mean not working just that it only comes with windows 7 drivers.

     

     

  • AMAMSNL

    1 Rookie

    •

    14 Posts

    6230

    0

    Posted August 15th, 2019 06:00

    Hi Speedstep thanks for your advice.

    Is XP or 7 the only option I mean the update .exe files also run under dos, (however FreeDos is failing).

    Would it help if I boot from XP or 7 Bootable (dos) disk?

    Thanks

  • savvy2

    4 Apprentice

    •

    2547 Posts

    6222

    0

    Posted August 15th, 2019 08:00

    9010 what , what case is it?  so we know what motherboard you have, and mobo own BIOS so .... not stated.

    there are 5 (five 9010 formfactors ) what might YOUR, or is TM = MT or TM = trademark>?hummmmm

    MT as in MiniTower (the big'n)

    Built in 2012  and is not XP 2001 year PC, sorry NOT ! how dell support this PC IDK. but its not XP PC. w7 it is.

    Gen 3 intel processor, way way behond any XP 2001 box.  (fact)

    if the F12 tiny menu is missing update bios, that leaves what.? seems it is mission best I can tell,

    Freedos or DRdos, dell has its own DR DOS, if you look for it. (it does work Ive tested it, but not this PC)

    the most safe way is F12, then FreeDos (or DRDOS(the D mean dell) and burning in infected windows

    well I think that is nuts.  with windows.  (in most FIRMWARE pages read the text there and read the words

    if upgrading for Linux system do this,  (freedos ) read what it says there,  for Linux PCs, 

    you  do know the hDD can be missing right? and burn bios, no OS needed or even desired(big problems)

    boot to USB , the best FREEdos is the one that has full memory management,. not the lean useless one. ok>?

    when burning firmware you need to be booted from fresh clean OS and worst of all is infected OS or any multitasking OS, like windows.

    and best yet under UPS power.

     Non-Windows users is stated in the text on what to do. at dell. 9010, and will quote it last.

    even users , that do not have windows on BARE METAL

    Oracle VM VirtualBox

    many folks use VM,  at bar metal. and run a host of OS from there.

    so how to burn FIRMWARE with VM PC.?

    answer follow the steps AT DELL for Non-Windows users). 

    ----------------------------now what your page said verbatum ------------------------------------

    read the bold'ed lines again.

    Download
    1. Click Download File to download the file.
    2. When the File Download window appears, click Save to save the file to your hard drive.

    Run the BIOS update utility from Windows environment
    1. Browse to the location where you downloaded the file and double-click the new file.
    2. Windows System will auto restart and update BIOS while system startup screen.
    3. After BIOS update finished, system will auto reboot to take effect.

    Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
    1. Copy the downloaded file to a bootable DOS USB key. (key = usb flash momory stick tumb drive)
    2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
    3. Run the file by typing copied file name where the executable is located.
    4. DOS System will auto restart and update BIOS while system startup screen.
    5. After BIOS update finished, system will auto reboot to take effect.

    Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
    1. Copy the downloaded file to a bootable DOS USB key. (said no link to how, wow)
    2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option"
    3. Change "UEFI" to "Legacy" of Boot List Option
    4. Click "Apply", "Exit" to save changes and reboot system.
    5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
    6. Run the file by typing copied file name where the executable is located.( use 8.3 file names !)
    7. After BIOS update finished, system will auto reboot .
    8. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option"
    9. Change "Legacy" to "UEFI" Boot Option. (if was before)
    10. Click "Apply", "Exit" to save changes and reboot system

    --------------------------------------------------------------------------------
    Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
    Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
    If you don't enable BitLocker on your system you can ignore it.
    Note 3: If you are currently running Windows 8.1 with BIOS older than A15 please flash BIOS in DOS mode.

  • savvy2

    4 Apprentice

    •

    2547 Posts

    6218

    0

    Posted August 15th, 2019 09:00

    how funny that is.

    all that is contradicted here. 2012 PC runs 10, 100 percent perfectly, even my 790 does.

    https://www.dell.com/support/home/us/en/04/product-support/product/optiplex-9010/drivers

     

    and has A30 bios.

    and may need step to get there but the text files there are easy to read,,  read the rules first.

    then leap.

    use FREE DOS or DRDOS  to burn it.

    latter MS removed the windows DOS DLL file from the OS, so that dos disks can no be made (history ) w8 year?

    then top PC makers had to offer FREEDOS< or there own, dell uses both.

    Dell used their  OWN DRDOS< for years but then started using Freedos.

    Then latter, with UEFI Class 3 ,bull,  DOS is GONE FOREver this is why all this is so confusing.

    the true danger and real is bricking a good PC, after the burn.

    the big error here, is burning any firmware with infected OS or that funky bad OS runing off some nasty

    old 2012 HDD that fails SMART tests.  gee what a dumb thing to do now. 6 years later.

    always burn from a CLEAN OS, at least. best is DOS , of any kinds , single tasking it and safe.

    F12 is best way of all seen here. no safer way exists,  others call it ez-flash and more, this is 3020 PC.

    my 3020 has this, most shouldmy 3020 has this, most should

    if you have no F12  flash words there,

    the DOS Is best way to burn.  a clean made DOS boot usb stick and read the linux (other OS) steps at dell.

    do that and win, 

     

    DRDOS is here, and at DELL.com

    read this , and make a KEY (USB DOSS KEY) DDDP key, it does work and I have tried it.

    click menu button installed to USB drive. (but will not work if using UEFI class 3 PCs)

     

    https://www.dell.com/support/article/us/en/04/sln143196/how-to-create-a-bootable-usb-flash-drive-using-dell-diagnostic-deployment-package-dddp?lang=en

  • QuiverNAY

    1 Message

    5852

    0

    Posted October 6th, 2019 22:00

    Hi there, 

     

    I believe the main problem with the update was in the NVIDIA Quadro NVS.

    I have the same problem with NVIDIA Quadro NVS 420.

    After I have removed this card from the PC, I was able to install the BIOS.

  • savvy2

    4 Apprentice

    •

    2547 Posts

    3930

    0

    Posted October 7th, 2019 04:00

    NVIDIA Quadro NVS 450/16GB RAMNVIDIA Quadro NVS 450/16GB RAM

    so true, FREEDDOS will not like that card.

    so that be step one remove it from the PCI slot. and use local VGA.

    or try DDDP , dells DrDOS , search for It at Dell this is the old Dell DOS boot disk for flashing.

    it may support that Quadro, but Id remove it.

    yes , it is best to remove lots of things to flash, for many reasons. (called minimum system)

    yes, even pull all SATA cables , so there is no XP,vista,w7,8,8.1 or 10, there zero OS present !

    all Drives unplugged, all usb device but say keyboard USB

    all PCI-e cards too.  run with VGA on old PCs. (no UEFI to get in the way)

    and use a UPS so if you get AC power bumped, the flashed eePROM does not scramble.

    keep in mind the #1 goal is not brick the PC, oK>?  millions have this year,  flashing wildly.

    like this:

    9010.JPG

     

  • savvy2

    4 Apprentice

    •

    2547 Posts

    2502

    0

    Posted October 7th, 2019 04:00

    if you remove the Quardo card, then the VGA jack goes back ONLINE, see? it;s automatic .

    there are many freedos distros, many will fail. lacking a driver.  best is the VGA port.  ok?

  • speedstep

    11 Legend

    •

    46969 Posts

    4106

    0

    Posted October 7th, 2019 06:00

    Freedos fails because the update is larger than the available memory in freedos.  The other issue is video cards.  Use onboard video to do bios updates then put the card back.

    Old bios updates work fine with freedos but newer ones like the 9010 and 9020 do not.  I keep a Dell XP SP2 Green CD in the shop specifcially for installing bios on machines that need XP.

     

    You set up as Legacy and ATA instead of AHCI then make bootable XP then install CHIPSET and Management engine files.

    Then run the bios update AS ADMINISTRATOR and it works.

    You have to do it in sequence you cannot jump from A01 to A20 for example in one step.