Hercul_5s

updated

6 years ago

H

Hercul_5s

1 Rookie

•

13 Posts

0

9918

September 21st, 2020 07:00

Dell Optiplex 5080 unable to boot from CD/DVD

Hi all,

The recently purchased Optiplex 5080 does not boot from the CD Drive. The CD Drive appears everywhere except of the Boot Sequence setting. Following the new guide https://www.dell.com/support/article/de-de/sln142679/how-to-enable-boot-from-dvd-option-with-uefi-boot-mode-enabled-windows-10-8-1-8?lang=en doesn't help because in the File System List the value "CD" does not appear. The version of this BIOS is not covered on the guide.

Can someone please advise? Thank you.

 

  • speedstep

    11 Legend

    •

    46969 Posts

    9114

    0

    Posted October 7th, 2020 22:00

    The reason its not booting has to do with the region code setting.

    You can install puppy linux and run regioncode to set the drive to your region

    There are eight region codes possible, currently six are used:
    North America (USA and Canada)
    Europe, Middle East, South Africa and Japan
    Southeast Asia, Taiwan, Korea
    Latin America, Australia, New Zealand
    Former Soviet Union (Russia, Ukraine, etc.), rest of Africa, India
    China

    DVDs contain most often a region code flag indicating the geographical region where the DVD was published (enabling the film and software industry to control the distribution).

    WOOF Puppy still runs clean and mean live from a CDRWOOF Puppy still runs clean and mean live from a CDR

     

     

    It will boot fine every day from a CD but WILL NOT BOOT from a DVD that is region coded.

    Puppy linux CD likely works fine

    burn a copy on cdr and F12 boot from that.

    Once your region is set if the dvd is legit and for your country it will boot windows dvd. dont forget to press enter when you see the press any key to boot from CD.

    http://ftp.nluug.nl/ftp/pub/os/Linux/distr/puppylinux/puppy-fossa/fossapup64-9.5.iso

    Fossapup64 Puppy 9.5 - released September 2020

    This is the fourth official release of an Ubuntu based 64 bit Puppy

    https://www.youtube.com/watch?v=qibxDA_Kxdk

     

     

    BIOS (Basic Input/Output System) based computers have been around for a long time. Most people familiar with computers have been into the BIOS setup at some point to change a setting such as boot device order or the system time.

    UEFI (Unified Extensible Firmware Interface) is a standard and is (however much a pain it is) necessary to help address the limitation of BIOS/MBR systems limit of support for hard disks above 2 TB. MBR can not work on large disks. It is fairly inexpensive these days to replace your current harddisk with a 4 TB or even 6 TB.

    You must turn secure boot off for an os that doesnt have security certificate from microsoft to F12 boot.  Dells in general will not show the F12 boot menu when secure boot is on so you F2 into bios setup and turn it off.

    Simply type the following command to install regionset:


    $ sudo apt-get install regionset

    then run by Typing the command as follows:


    # regionset /dev/dvd

    regionset version 0.1 -- 
    reads/sets region code on DVD drives Current Region Code settings: RPC Phase: II type: SET vendor resets available: 4 user controlled changes resets available: 4 drive plays discs from region(s): 5,
    mask=0xEF Would you like to change the region setting
    of your drive? [y/n]:

     

  • speedstep

    11 Legend

    •

    46969 Posts

    9022

    1

    Posted October 8th, 2020 15:00

    My solution does apply you have to set region on DVD before it will boot. Region coding is set from windows or linux. CD booting doesnt have region code or encryption.

    Any os other than Windows 10 64 bit or Ubuntu 18.04 etc will require secure boot OFF in bios for F12 booting.

    Only 64 bit os is supported and it must be GPT UEFI not MBR Legacy. This is why I recommend making Puppy Linux CD.

    1. Press Windows Key + R Key.

    2. Type “devmgmt.msc” without the quotes and hit on Enter Key.

    3. Expand DVD/CD-ROM drives, right-click the DVD drive for which you want to change region settings and then click Properties.

    4. On the DVD Region tab.

    5. Under list of regions, scroll down the mouse to search for your region from the list and click on it.

    6. Then region you want will be listed below, then click on Ok button.

     

     

  • speedstep

    11 Legend

    •

    46969 Posts

    8984

    0

    Posted October 9th, 2020 13:00

    5080 works with ubuntu.

    https://certification.ubuntu.com/hardware/201912-27651

    There is support for it but support is not free.

    Dell does not support Linux unless the system came with it from dell.

  • Hercul_5s

    1 Rookie

    •

    13 Posts

    7658

    0

    Posted October 14th, 2020 00:00

    Hi all,

    I got the CD finally identified by using openSUSE and the instructions there https://software.opensuse.org/distributions/leap?locale=en 

    What actually helped and made the difference is the tool ImgBurn http://www.imgburn.com/ 

    Thank you for your replies.

  • DELL-Cares

    Moderator

    •

    27852 Posts

    •

    772 Points

    7357

    0

    Posted September 21st, 2020 07:00

    Thank you! We have received the required details. We will work towards a resolution via private messages to ensure the security of your information. In the meanwhile, you may receive assistance or suggestions from the community members as well.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    7337

    0

    Posted September 21st, 2020 19:00

    Are you certain it's a CD drive the 5080 has?  I haven't heard of PC's coming with CD drives in a long time.

    Optiplex 5080 Spec Sheet 

    Screengrab is from 5080 spec sheet:

    Capture+_2020-09-21-21-29-35.png

     

     

  • Hercul_5s

    1 Rookie

    •

    13 Posts

    7331

    0

    Posted September 21st, 2020 23:00

    Indeed, I was also surprised to see that it is available.

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    7311

    0

    Posted September 22nd, 2020 10:00

    Shoot, one of our other experts will have to answer.  If something doesn't show in BIOS, I don't always have the answer.  But if it shows in BIOS and not Windows, then I have the answer.

    I wonder if your BIOS sees the CD drive as DVD drive.  I take it rhat it won't take a DVD?  So many things are on DVD now days, like software for one, a PC coming with CD drive leaves me a bit baffled.

    I don't know what size your 5080 is, but may be look into getting a DVD drive for it?  I wouldn't be surprised if that's what you expected it to come with.

    3050.jpg

     

  • Hercul_5s

    1 Rookie

    •

    13 Posts

    7283

    0

    Posted September 24th, 2020 05:00

    Hi, this is how the boot sequence look like and the options available

    5080_Boot.jpg

  • DELL-Cares

    Moderator

    •

    27852 Posts

    •

    772 Points

    7285

    0

    Posted September 24th, 2020 05:00

    Please share the BIOS image where the optical drive is missing so that we'll check the details and assist you further.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice