Power supplies are Not universal across 7040 7050 7060 7070 7080
Same number of PINS on any given proprietary connector DOES NOT indicate compatability. AFAIKT there are ZERO 500W upgrades for the 5070 5060 5050 5040 5020 5010.
Thank you for the quick response and explanation. Please let me know if there is any 3rd party PSU which can be used with 5050 motherboard, even if it not fits to the case?
Please press the blue Accept as Solution button below if this post answers your question.
There is an Ugly mod that likely works. The tower is not actually a full size tower so ANY regular psu does not fit.
You cant upgrade a stock power supply because the motherboard uses a proprietary 6 or 8 pin connector and its not Full Size or even SFX or TFX its smaller.
Moddiy makes a 24 pin to 6 pin adapter. Regular size psu must sit outside the case. You remove the internal power supply and run the wires in the hole left behind by removing the internal PSU. (I also highly recommend using electrical tape on the hole edges or sleeving around the wire going into the case so that the sharp edges of the case don't cut into the PSU wires causing a short circuit.)
Please press the blue Accept as Solution button below if this post answers your question.
I am not Dell. I do not have access to the Dell Parts Database. Ask @DELL-Chris M if 4FWF7 is working for an optiplex 5050 tower. Visually 460W appears to be a propriteary 8 pin power supply but I'm only guessing. YMMV. 5050 afaikt DOES NOT use Dual 4 pin proprietary connections like the G5, XPS 8940, 7080.
redxps630
11 Legend
•
16431 Posts
•
83176 Points
6554
0
Posted October 14th, 2021 20:00
I guess what you read was the ampere max on factory label on the psu.
DK87P says 16.5A max for +12V A rail.
Y7R0X says 18A max for +12V A1+A2 rail
that is normal difference between the two psu. 500w carries more current on 12 V rails.