TrueMobile 2300 (TM2300) regularly failing and requires power cycling
I just bought a TrueMobile 2300 router (referred to as TM2300 from now on) which replaced a Belkin F5D-7230-4 802.11g router. While the Belkin scored extremely high in performance tests, it is missing some essential features that I needed that was available on the TM2300.
I hooked up the TM2300 and was very pleased with the easy setup. Configuaration was simple and was up and running in a 10 minutes.
The TM2300 is setup to obtain an IP via DHCP from my ISP and it is also setup as a DHCP server (lease time is 7 days) for the clients in my house (2 PCs and 1 laptop which has TM1300 minipci). The problem I'm having is that the TM2300 seems to stop responding at all -- it does not route any network traffic or issue any IPs. The failure occurs every couple of hours, and a power cycle solves tye problem (I just unplug the power and immediately plug it back in). Once I do that everything is okay.
I'm running the latest firmware (3.0.0.8, 7/24/2003) and have the TM control utility installed on my main client PC. The TM control utility sits in the system tray , but for some reason it reports that "Dell TrueMobile 802.11g router was unable to detect the Internet Connection" and it is colored in yellow instead of gray (which i guess indicates a warning).. It is like this even if the router is functioning properly. If the router is functioning properly and I launch the utility, its able to communicate with the router and it show all hte information and shows that the router has an IP address from my ISP. No idea why the system tray icon improperly shows the status.
Does anyone from Dell have a solution to this? If I can't fidn a solution quickly, then I'm likely to return this and buy one of your competitor's routers and you will have lost a customer. Seems like I'm not the only one who is looking for alternatives as the forums are littered with people sick of this problem. Please help! If it were not for this problem, I would be 100% satisfied!
I'm also still having this issue. I'm going to call Dell Support tomorrow to see if they can resolve this. I have a feeling that it's going back though. You're thread has not received any responses other than this, so it seems like Dell is avoiding the issue as this is a monitored board. :(
Please reply to this thread with the results of your tech support call. I'm going to call myself tommorow or the day after and will report my results as well. If there is no admission on dell's part that something is wrong, then this thing is going back and I'm going to have to try another manufacturer's router.
FYI -- stay away from Belkin 802.11g router as it is a piece of junk.
I called tech support and they suggested I re-flash the unit with the current firmware. I did it, and for the last 36 hours the unit's been up with no lockups.
I just applied the firmware from the link above and my router sitll shows the same version -- 3.0.0.8 which is what I suspect is the latest version anyways. So reapplying the firmware just flashed it with the same version.
We'll see if the router goes down or not. However, my problem with the control utility still remains teh same -- it still reports that the router does not have an internet connection, even though I'm using it right now!
I am having a similar problem with my Dell TM 2300. The wired connection to my Win XP PC works great, but the wireless connection to my Win XP Dell Inspiron 5150 (built in Dell Mini-PCI 802-11 a/b/g) works fine at first, but drops the connection after ~ 5-10 minutes. Windows first displays a "connection lost" message, then "Cable disconnected" message after which the wireless connection is lost. I spoke with Dell Tech Support about this issue and downloaded and installed updated Wireless NIC drivers (R63259.exe) per their instructions to no avail. Any ideas? I can't help but wonder if the TM 2300 has buggy hardware/software or is just a piece of crud.
Woke up this morning to the same problem. Had to power cycle the router to get everything working again. Thankfully I kept my trusty Linksys and can use that (running 3 years without a problem at all) as my router and keep this POS as just an access point.
No wonder they were giving it away free with the purchase of a PowerConnect switch.
pstage
21 Posts
947
0
Posted October 29th, 2003 01:00