network cable unplugged error message on optiplex gx 150
Hi everyone can you help I keep getting this message on this machine I bought at an auction. the cable is not the problem because when I connect the cable to a different computer it works fine . I dont believe it is the onboard card because when I plug in another card I still have the problem. the onboard card has never worked. winxp set up a home network does not solve the problem. Your thoughts would be most apreciated I have spent many hours trying to suss this out Im assuming it can easitlly be fixed if one knows what to do. Ps another computer I bought at the same time also gives the same message. many thanks Tim
Here's a pretty comprehensive list of why one would get the "network cable unplugged" message (taken from the Microsoft.Public.WindowsXP.network_web newsgroup:
1. The network cable really is unplugged. 2. The network cable is defective. 3. It's plugged in, but there's nothing connected to the other end. 4. It's plugged in and connected on both ends, but the device on the other end isn't turned on. 5. The cable is the wrong type. Connecting two computers directly, without a hub, switch, or router, requires a crossover cable. A regular cable won't work. 6. The cable is connected to the uplink port on a hub, switch, or router, instead of a regular port. 7. Some hubs, switches, and routers disable the port next to the uplink port when the uplink port is in use. 8. The network card driver program isn't working right. Download and install the latest XP-compatible driver from the manufacturer's web site. 9. The network card is configured to automatically sense speed and duplex settings but isn't doing it correctly. Set those options manually, as shown here: http://www.practicallynetworked.com/sharing/troubleshoot/networkcard.htm
I was having the same problem on a brand-new inspiron 9400 laptop.
--> it didn't work at all when disconnected from power (i.e. on battery).
When I connected the power, it started to working immediately.
Hope this helps.
btw does anyone have an idea why this networking cabel says "unplugged" until I plug in the battery.
I think something is defective.
volcano11
2 Intern
•
27973 Posts
294
0
Posted July 30th, 2006 05:00
Here's a pretty comprehensive list of why one would get the "network cable unplugged" message (taken from the Microsoft.Public.WindowsXP.network_web newsgroup:
1. The network cable really is unplugged.
2. The network cable is defective.
3. It's plugged in, but there's nothing connected to the other end.
4. It's plugged in and connected on both ends, but the device on the other end isn't turned on.
5. The cable is the wrong type. Connecting two computers directly, without a hub, switch, or router, requires a crossover cable. A regular cable won't work.
6. The cable is connected to the uplink port on a hub, switch, or router, instead of a regular port.
7. Some hubs, switches, and routers disable the port next to the uplink port when the uplink port is in use.
8. The network card driver program isn't working right. Download and install the latest XP-compatible driver from the manufacturer's web site.
9. The network card is configured to automatically sense speed and duplex settings but isn't doing it correctly. Set those options manually, as shown here: http://www.practicallynetworked.com/sharing/troubleshoot/networkcard.htm
Steve