UNSOLVED

Kansas Ron

updated

21 years ago

KR

Kansas Ron

23 Posts

0

7574

December 7th, 2005 12:00

How do I set my 9300 to connect via wired when in Kensington dock?

I have a Dell Inspiron 9300 and the Kensington "dock".  I have my wired network plugged into the dock.  The 9300 always goes to wireless first.  Can I set it so that it will use the wired first?
  • wnorthrup

    14 Posts

    161

    0

    Posted December 11th, 2005 13:00

    I had that dock, and sent it back.  The Kensington "dock" really isn't a dock.  It's a USB connected hub type deal.  The Inspiron's don't have a true "docking" connector.  If they did, you could use multiple hardware profiles to fix this right.  One using the wireless (laptop) and one using the Ethernet (docked).  But if the had this connector, they would be Latitudes!

    Unless you are connecting fancy speakers, perhaps (which I was not), I cannot figure out what good that "dock" is, so I sent it back.  In your case, the 9300 has built-in Ethernet...you don't need the dock for that.

    To solve your problem, you can just turn off the wireless antenna when you are connected to the "dock". (Hold down the blue "Fn" key and press "F2".)  This turns off the antenna and the wireless will disconnect.  When you want to operate wirelessly, just do that again to toggle it back on.

    I have not figured out (either at home or at work) how to force the wired network to a higher priority so it gets used first.  At work, I have a Latitude and used hardware profiles to get this done. 

  • Kansas Ron

    23 Posts

    161

    0

    Posted December 12th, 2005 12:00

    I do realize that it is not a true docking station (had considered the HP Pavillion zd8000 but was not too eager about having a laptop using a desktop P4).  I have it plugged in and overall it works fine.  I have a lot of USB items and am using a couple of hubs also, since I did not want more than one USB and the power cord plugged into the laptop so I did not have to constantly be plugging and unplugging a lot of cables.  I do know that Dell has had problems with some of their docking stations in the past and likely decided to get away from having to deal with those problems.