UNSOLVED

matluka

updated

6 years ago

M

matluka

3 Posts

0

594

January 12th, 2021 02:00

Multicast settings 3048T-ON and 1148T-ON

Hello, first of all, sorry for my English. I will try to describe you my situation and what i want to do...I am a little bit new in multicast routing, in this way, i dont have a lot of experiences. In our organisation, we have one central L3 router Cisco Catalyst 6509 (gateway for all VLANS) and lot of dell switches (some L3 too, but without L3 routing, just with L2 settings). In main locations, we have Dell 6248P switches, behind them there are various models (5448, 3524P). Switches are in their own mngt private vlan, but also have multiple public vlans. In these public VLANS, there is possibility to see multicast TV on ip address 233.x.y.z. (Which is out of our organization, but we have acces to this content). In current situation, we have commands on switch interface vlan abc (public vlan) bridge multicast forbidden forward-unregistered exit Everybody can see multicast content in vlc. But in our newer models (N2048, 3048T-ON and 1148T-ON), it isnt possible. I think that N2048 and 1148T dont support these command (just ip igmp snooping), but in L3 switch 3048T-ON this command is also missing. Can you help me, how can i configure our switches to join multicast content? Our switches dont have public ip address. Can i use IP pim on L3 Catalyst and than on L2 switches? I dont have any idea, how to do it, is it possible? Thanks