Hi, I use a Dell 6248 switch and I want to switch vlan of a particular device but I don't know on which port this device is connected. How can I find this information without having to physically go to the switch.
I don't know if it matter or not but the dell switch is not the master switch doing the routing.
Thanks for the tip but my device is not a computer so this doesn't really help, I will repeat my question: How can I find which port correspond to a specific IP address ?
Hi, this is what is returned from this command, I don't know if I should enable or disable something in this configuration to have IP address returned.
Dell6248#show ip arp inspection
Source MAC Validation.......................... Disabled
Destination MAC Validation..................... Disabled
IP Address Validation.......................... Enabled
VLAN Configuration Log Invalid ACL Name Static flag
I tried that already but since the swith as only 1 IP address for vlan20 it can't ping the vlan 10 IP that are located on other port on that same switch...
Connect to the IP address of the switch through an ssh or telnet client, like Putty. You'll be prompted for your username and password. Once your in, type "show bridge address-table" to see the mac address table of the switch. I'm not 100% certain that the port numbers are correct, however. I'm still trying to figure out how to refresh the data.
Also, you can connect to the console through your web browser. Once you're in, navigate to Switch>Address Tables>Dynamic Address Table to view the MAC address to port table.
cividan
1 Rookie
•
16 Posts
32513
0
Posted November 1st, 2012 15:00
Ok and how do I associate the mac-address to an IP address ?