Has anyone ever connected a S4148T (OS10) and S4048T (OS9) together via QSFP+ 40Gb?
We can connect S4048Ts together all day long. We try connecting to S4148T and the port lights up for a few seconds and then the port shutdowns on the S4148T.
Some background and Information:
Using a Dell branded QSFP+ DAC cable.
Running latest firmware on both switches
OS Version: 10.5.3.0 Build Version: 10.5.3.0.44
Dell EMC Application Software Version: 9.14(2.10)
S4148T using port profile 2.
Port configuration on S4048T:
! interface fortyGigE 1/52 no ip address switchport no shutdown
Port configuration on S4148T:
! interface ethernet1/1/27 no shutdown switchport access vlan 2 flowcontrol receive off flowcontrol transmit off
Hi - tried a 1M and 3M Dell QSFP cable. Also tried a non branded cable. When you run show inventory media both switches correctly identify the media plugged into the port. Tried port 28 as well. We have tried port profile 6 but not 3 or 4.
ChrisJames_PGS
1 Rookie
•
4 Posts
1072
0
Posted March 8th, 2022 03:00
OK - this is solved now. You need to add the following to the port definition on the S4048T
intf-type cr4 autoneg