UNSOLVED

SHERIFF A.

updated

17 years ago

0

1085

July 3rd, 2009 23:00

ndmp_save fails on filer

Please can anyone tell me what this error below means when backing up an ndmp client?

nsrndmp_save: NDMP Service Log: DUMP: could not create "backup" snapshot : No space left on device.

Still new with the Networker. I'm currently on version 7.2.2 running on a windows server 2003 R2 SP2 (x64) as the NW Server backing up 10 windows clients and 1 ndmp client (NetApp 3020 Filer) via ndmp command.
I have been seeing that the ndmp backup skips some of the volumes on the filer that serves as a LUN to other windows servers while other volumes gets backed up.
Message above is what i find on the daemon log. Am not sure if this has something to do with the allocated snapshot space used for ndmp dump because
snapshots are not enabled on LUNs so all space are utilized.
Please can anyone help with this?
  • satishs

    50 Posts

    341

    0

    Posted July 6th, 2009 09:00

    Please can anyone tell me what this error below means
    when backing up an ndmp client?

    nsrndmp_save: NDMP Service Log: DUMP: could not
    create "backup" snapshot : No space left on device.

    Still new with the Networker. I'm currently on
    version 7.2.2 running on a windows server 2003 R2 SP2
    (x64) as the NW Server backing up 10 windows clients
    and 1 ndmp client (NetApp 3020 Filer) via ndmp
    command.
    I have been seeing that the ndmp backup skips some of
    the volumes on the filer that serves as a LUN to
    other windows servers while other volumes gets backed
    up.
    Message above is what i find on the daemon log. Am
    not sure if this has something to do with the
    allocated snapshot space used for ndmp dump because
    snapshots are not enabled on LUNs so all space are
    utilized.
    Please can anyone help with this?


    ==============

    Is there a pattern where backups fails for volumes where there is no snapshot?

    This doesnt seem to be Networker NDMP backup issue, but NetApp space issue. When NDMP starts backups, it first creates a snapshot. You probably need to change your NetApp volume to have snapshots...
  • 341

    0

    Posted July 6th, 2009 10:00

    Yes just figured out that the ndmp dump needs enough space reserved for snapshot during ndmp backup. I did allocated more space to the LUN on filer and ndmp backup was success.
    I have no problem with other volumes with snapshot space reserves.Ndmp backs them up properly but for LUNs without snapshot enabled on those volumes in filer, you still need to have space reserve for ndmp snapshot during backup otherwise it'll fail. Below is my command line for ndmp client backup.

    (nsrndmp_save -s backup-srv -c ndmpclient -M -T dump)

    Thanks,