UNSOLVED

ClintonRandall

updated

18 years ago

0

459

December 8th, 2008 11:00

Equivalent of jbconfig

Is there an equivalent of jbconfig on the GUI side for NW 7.4.2? I'm trying to prepare disaster recovery tests and I'm trying to gather information for both CLI and GUI sides. Thanks,
Clinton
  • dpinink_silva

    2 Intern

    •

    724 Posts

    157

    1

    Posted December 9th, 2008 09:00

    Yes, this is a text from the Administrator's Guide:

    How to add a library device
    To configure a new library resource to a storage node automatically:
    1. In the server¿s Administration interface, click Devices.
    2. Open the Storage Nodes folder in the navigation tree.
    3. Right-click the storage node to which the device is to be configured, and select
    Configure All Libraries (which is available from many of the menus throughout
    the Devices task).


    and so on....

    But remember this:

    Only devices that have serial numbers can be autoconfigured. Use the jbconfig
    command to configure devices that do not have serial numbers (the inquire or sn
    commands can be used to determine if a device returns a serial number).
  • Hari5

    443 Posts

    157

    0

    Posted December 9th, 2008 18:00

    Actually the auto-configure using the GUI with NW 7.4 is much easier than using jbconfig :)