UNSOLVED

popelife

updated

18 years ago

P

popelife

21 Posts

0

18661

June 30th, 2008 18:00

Jimmy - Will the new 2408 match the "old" 2408?

I guess this is one for Jimmy, but since the next 2408 with the new firmware will have a new part number, does that mean there are significant component changes as well as new firmware?

 

If so, will the new 2408 match the old one visually? Because I'm intending to put together a dual monitor setup. I wanted to see what I thought of the 2408 first, so I only bought one to begin with.

 

Will it be possible to get the new firmware onto the "old" 2408?

 

Thanks. Paul.

 

BTW, if you haven't seen the other thread... is there any hope in the future of some way to switch the sharpening off altogether? i.e. not blurring or sharpening the image, but simply sending the pixels from a DVI connection to the panel as is.

  • DELL-Jimmy P

    2 Intern

    •

    1542 Posts

    848

    0

    Posted June 30th, 2008 20:00


    @popelife wrote:

    I guess this is one for Jimmy, but since the next 2408 with the new firmware will have a new part number, does that mean there are significant component changes as well as new firmware?

     


     

    No, the new part number has nothing to do with the monitor, in fact any monitor we sell will most likely get a new part number at the same time. this is just an internal process change that they needed a way to track before and after and changing the part number was the easiest way. The firmware happens to coincide with this so they decided they didn't need a firmware revision number and part number change.

  • popelife

    21 Posts

    848

    0

    Posted June 30th, 2008 20:00

    Thanks for the reply, I'm with you now. That's good news as far as I'm concerned, allays my concern that the revised monitor might have a different panel or something. I can hang on to my current 2408 and see what happens.

     

    Much appreciated. 

     

  • popelife

    21 Posts

    848

    0

    Posted July 1st, 2008 02:00

    Ooh, actually, same situation here. My 2408 isn't really acceptable quality for me, although I can live with it short term. Problem is, in my case, if I had to return the monitor now, before the update is available (assuming I can return it to the retailer at all) I would have to buy two of something else, because I can't be without a monitor for even a couple of days.

     

    So it would help to know if the sharpness/ringing/processing artefacts issue will be fixed, and whether the fix can be applied to the original "A00" model.

     

    Although I realise this is probably not a question you're at liberty to answer:smileysad:

  • Maw77

    2 Posts

    848

    0

    Posted July 1st, 2008 02:00

    Hi Jimmy, hopefully you can answer this...

     

    I bought a 2408WFP rev A00 a couple of weeks ago, and want to exchange it for the new A01 when it's available. Will this exchange need to be done within the 30 day return period, or will Dell do an exchange on this after the 30 days are up, on the grounds that the A00's are defective?

     

    If I need to, I'll return the A00 now, then buy the A01 after it's been out awhile and has been tested. However, I'd rather just do an exchange in a few weeks, because I got the A00 on sale and would like to keep that price, if possible.

     

    Thanks in advance for your input.

    Message Edited by Maw77 on 07-01-2008 01:18 AM
  • superkarts

    18 Posts

    850

    0

    Posted July 1st, 2008 07:00

    so the New Revised version is out ?
  • popelife

    21 Posts

    850

    0

    Posted July 1st, 2008 10:00


    @superkarts wrote:
    so the New Revised version is out ?
    Some people have received an "A01" apparently, but there's no discernable difference from the A00. What we're interested in is the revised firmware (which as I understand it, will be in a 2408 with a new part number)
    So no, not yet.  

     

  • superkarts

    18 Posts

    850

    0

    Posted July 1st, 2008 11:00

    i ordered the monitor today.ill let you guys know when i get it :)
  • DELL-Jimmy P

    2 Intern

    •

    1542 Posts

    850

    0

    Posted July 1st, 2008 14:00


    @Maw77 wrote:

    Hi Jimmy, hopefully you can answer this...

     

    I bought a 2408WFP rev A00 a couple of weeks ago, and want to exchange it for the new A01 when it's available. 


    Let me see if I can get this across without upsetting anyone. We don't replace peoples monitors just because a new firmware is released, however, if you are having a problem with your current monitor and contact tech support and they can not resolve the issue they will exchange it as long as it has a current warranty.

     

  • DELL-Jimmy P

    2 Intern

    •

    1542 Posts

    850

    0

    Posted July 1st, 2008 14:00


    @popelife wrote:

    @superkarts wrote:
    so the New Revised version is out ?
    Some people have received an "A01" apparently, but there's no discernable difference from the A00. What we're interested in is the revised firmware (which as I understand it, will be in a 2408 with a new part number)
    So no, not yet.  

     


    No one has received a monitor with the new firmware because it has not been released.

  • Zoder

    46 Posts

    360

    0

    Posted July 2nd, 2008 00:00

    Jimmy,

     

    Why doesn't Dell make monitor firmware updates available for download?  Is it that the higher-ups are afraid inexperienced users will fry the monitor?