Hi, just got a u2311h yesterday and was looking for a bit of advice/help regarding this display. I have a fair amount of black light bleed and a quite significant blue/pink tinge (now i know IPS panels have this but i dont expect it to be this bad!). Here are a few images of my display running at ~35 brightness with a black display
(backlight bleed) (pink tinge) (backlight bleed when vertical)
Now i dont suppose this is a "good" display? Seems a bit poor QC if im honest... is a replacement a possibility? Also i had a slight problem when i booted my pc today, turned the monitor on and it went to the windows 7 login screen where i typed my password and then my monitor went to sleep... i could hear windows loading and i could constantly hear the sound when you connect/disconnect a device which was repeated about 20times (the monitor was going mental switching from black screen to standby), had to turn the monitor off numourus times and about 2 minutes later it was out of sleep mode, not sure if thats a faulty monitor or just a bad glitch but will check it when i reboot later.
Any helps appreciated as i do want a good monitor haha.
Yup, that looks pretty bad to me...I'd definately ask for a replacement...
I've just RMA'd a 2410 as I had bad consistency with the overall display when viewing white pages which showed up as dirty whites on the bottom half and a darkness on the left side. I'm guessing its an uneven AG coating?
My backlight was a little hot in the lower right corner but nothing like yours :emotion-6:
edited to change: the darkening was actually on the left side - not the right.
Thanks for the response, dont suppose you have the contact email for dell? I cant find it, always asks for a service code but my monitor doesnt have anything apart from a serial number!
No sorry, I don't have the address. I had the same issue but I didn't buy with Dell so had to contact the reseller to get an order code before Dell would go further with me..I believe the service tags only come on the Ultrasharp 27 and 30" models...
Good luck though - Dell should be speedy getting you out another one..
Oh dear... i looked at that FAQ aswell! Thanks for pointing that out :)
edit: hmm the FAQ links to the US support form, as im in the UK would this be the correct form/area http://support.euro.dell.com/support/emailcustomercare/emea/index.aspx?c=uk&l=en&s=dhs&cs=ukdhs1 ?
quirkalfeeg
4 Posts
638
0
Posted February 1st, 2011 12:00
Yup, that looks pretty bad to me...I'd definately ask for a replacement...
I've just RMA'd a 2410 as I had bad consistency with the overall display when viewing white pages which showed up as dirty whites on the bottom half and a darkness on the left side. I'm guessing its an uneven AG coating?
My backlight was a little hot in the lower right corner but nothing like yours :emotion-6:
edited to change: the darkening was actually on the left side - not the right.