UNSOLVED

Nexc

updated

22 years ago

N

Nexc

12 Posts

0

16411

April 5th, 2005 01:00

Clicking sound when Monitor is turned on

I have M782. While useing my computer today i have noticed the monitor would make a click sound and the screen would go black for a sec and come back. This would happen every couple mins or so and never happned before( monitor for 15 months). I tried unplugging the monitor from the computer and turning it on to see if it was a video card problem but the monitor keeps making a clicking noise when turned on and the screen stays black. After i plugged in back to my computer and started it up , the monitor would just make a clicking noise and wont come on.
 
Did my monitor burn out? Or is there something wrong that can be fixed with out replacing it? Thanks in advanced for your help.
  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    1527

    0

    Posted April 5th, 2005 18:00

    Nexc,

    Thank you for using the Dell Community Forum.

    Try putting the monitor in its optimal resolution.

    Setting the Optimal Resolution: Dell™ M782p Color Monitor User's Guide

    For optimal monitor performance while using the Microsoft Windows operating systems, set the display resolution to 1024 x 768 pixels by performing the following steps:

    1. Click the Start button, point to Settings, and click Control Panel.
    2. Double-click the Display icon in the Control Panel window, and then click the Settings tab.
    3. In the Desktop area, move the slide bar to 1024 by 768 pixels. Then click OK.

     

    Jesse L (retired)

  • Nexc

    12 Posts

    1527

    0

    Posted April 5th, 2005 18:00

    Its is impossible to change the resolutaion due to the screen staying black when the monitor is turned on when its plugged to the computer. I tried switching outlets and it still makes a clicking noise and the screen stays black. I unplugged it from the video card and the monitor test screen wont show up either.