
UNSOLVED
Closed
CY
chance.yohman
6 Posts
0
5893
October 14th, 2005 00:00
Replacing 15" SXGA+B Screen on a Dell Inspiron 5150
My laptop took a 3.5 ft dive off a desk, fortunately it looks like just the monitor is wrecked. I was looking around for replacement screens and it looks like they run from $250-$400. I have a few questions though.
Firstly, will I have any problems replacing my screen with a UXGA 15" screen? Will it work with my GeForce FX Go 5200 Graphids card which has 64MB of RAM? Also, does anyone have any suggestions when replacing the screen, or tips about being careful? The documentation here- http://docs.us.dell.com/support/edocs/systems/ins5100/sm/display.htm#1084976 looks straightforward. Thanks.
Firstly, will I have any problems replacing my screen with a UXGA 15" screen? Will it work with my GeForce FX Go 5200 Graphids card which has 64MB of RAM? Also, does anyone have any suggestions when replacing the screen, or tips about being careful? The documentation here- http://docs.us.dell.com/support/edocs/systems/ins5100/sm/display.htm#1084976 looks straightforward. Thanks.
Responses (2)
Solutions (0)
chance.yohman
6 Posts
342
0
Posted October 21st, 2005 18:00
A key to this whole experience is to give whoever you are buying from the correct Part # for the laptop screen.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
342
0
Posted October 14th, 2005 00:00
Ideally you should use exactly the same model of screen that came with your system (i.e., Samsung XYZ123).
Second best is to use another screen of the same resolution that came from another 5150 (or a model that was used in the 5150).
All bets are off if you just buy a 15" SXGA+ panel. They're not uniform devices - what fits one system and cables may not fit another.
If you do buy a used screen of a different model, make sure it comes with an inverter - the inverters are most often not interchangeable between models of screen, and a used one may have been stripped of its inverter.