UNSOLVED

Maggyver

updated

18 years ago

M

Maggyver

11 Posts

0

6653

March 29th, 2009 18:00

Precision M6300, Dualview no longer works, even after reformat/reinstall OS

Hoping someone has some information to share about this. I have a Precision M6300 with an Nvidia GeForce 1600M running XP Pro SP3. Sometime in the last couple of months, Nvidia's DualView stopped working on my computer. When I try to enable it, both of my Dell LCD monitors show up in the list (1908 WFP, 1707FP) and I can get Clone or Single Display to project onto either of them (although the resolution is often lower than it should be, resulting in fuzzy display) but when I try to initiate DualView using the 1908 as primary, it displays (at a lower resolution) on the 1908 but never sends a signal to the 1707.

I just reformatted and reinstalled Windows and the basic set of programs I was using when I was able to get it to work, and have the latest video driver installed that I got from the Product Support page for my system. I'm very frustrated to find that it still does not work. I'm wondering if there are any known software conflicts with DualView that I should reference, or whether this is an indication that I'm in need of warranty service.

 

Please advise, thanks!

  • rlwainwright

    1 Message

    210

    0

    Posted March 30th, 2009 10:00

    I am having the same problem and have not found a solution yet - Dell has replaced 2 video cards AND my motherboard.  It is quite frustrating to have such a nice, expensive laptop that cannot perform this simple function.  And I REQUIRE dual monitors for my programming work. This could be the last Dell for me...

    -RW-

     

  • 210

    0

    Posted March 31st, 2009 15:00

    We purchased a few of the M6300 laptops and have the same problem getting dual external monitors working through the port replicator (Dell #PR01X).   While connected to the replicator, we can only get one external monitor to work at a time.

    Two units are running WinXP SP2, and a 3rd has SP3.

    We got one working with two external monitors when they were hooked up directly to the back of the M6300. But none of them will work while docked to the replicator. Dell tech support was called and after 3 hours on the phone with 3 different reps, nobody had a solution.

    Very frustrating indeed since we bought two 24" external monitors for each laptop and they're useless.

  • dtigerino

    1 Message

    210

    0

    Posted June 28th, 2010 12:00

    I was having the same issue, but after reading your post, I decided to try changing the digital cable to an analog (SVGA) and that work.