
UNSOLVED
Closed
My mics arent working properly with my 5150
I first thought my microphon was broken so I bought a cheap replacement and resently found out that it was giving off a very annoying static sound when one of my f riends unloaded on me for having to listen to it when talking over skype.
So I was doing some testing and discovered my first mic actually works perfectly, the static on the other mic isnt present on my desktop and am worried it might be a problem with my sund card or laptops mic jack.
So before calling tech support and going through standard procedure I wanted to ask the community if there was any way to fix it or if this was a known problem or if anyone knows what the problem might be. Thanks for your time and any help you can give.
Responses (3)
Solutions (0)
- Alright, after further testing the mics and getting a third one to test I discovered that:1) The microphone was actually broken, but works more frequently on my desktop2) The cheaper mic has a constant static in the background on my laptop where on my desktop it is not present.3) THe third work doesnt work at all on my laptop and works on my desktop.The results are too random to draw any conclusions but I am leaning towards blaming my problems on a faulty microphone jack. Thanks for the help so far, I might call dell tomorrow to try and fix it.
Jim Coates
6 Operator
•
13582 Posts
120
0
Posted August 30th, 2005 09:00
Grog,
another thing is that a stereo mic that might work on the desktop might not work with the laptop which is designed for a mono mic.
Jim

Jim Coates
6 Operator
•
13582 Posts
120
0
Posted August 30th, 2005 01:00
Here is a suggestion for testing using Sound Recorder:
Open 'Sounds & Audio Devices Properties' (right click on the volume icon on the taskbar, or go through the control panel).
Select the Audio tab. Click on 'Volume' under 'Sound Recording' (not Sound Playback).
Click on the 'Select' box underneath the 'Microphone' control.
Push the mic volume slider all the way up.
Click on 'Advanced' under the microphone select box. Check the mic boost box.
Now open Windows Sound Recorder under Start/Programs/Accessories/Entertainment. Click on the red Record button and then record with the mic.
Notice the green line moving. If the tops of the peaks are so high they get flattened out there may be some digital distortion. In that case turn off mic boost. Adjust the recording volume slider until you achieve a good level for the test.
Another cause of static or crackling would be a dirty or defective mic jack. That would be obvious when you wriggle the plug and get increased noise.
Jim