UNSOLVED

annieb6427

updated

21 years ago

Closed

A

annieb6427

14 Posts

0

8829

January 28th, 2006 13:00

File i\386\ntkrnlmp.exe could not be loaded. The error code is 7.

Can someone give me advice on the above referenced error message.  I have been on the phone with Dell tech hardware support and software support (I purchased the 239.00 year of support) and I am getting no where!  The CD is NOT scratched, I have run every diagnostive I can and everything passes. 
 
Inspiron 9300
2gig of DDR2 533 MHz 2 Dimm
100GB Hard Drive
 
I formatted the drive and reset the partition to a single partition and I can't get XP to install.
  • hunterelite

    141 Posts

    298

    0

    Posted January 28th, 2006 21:00

    http://www.tek-tips.com/viewthread.cfm?qid=930337&page=1
    ^^^try that site and read
  • hunterelite

    141 Posts

    298

    0

    Posted January 28th, 2006 21:00

    can u load up into windows?

    or are u reinstalling BECAUSE u cant load into windows?
  • annieb6427

    14 Posts

    298

    0

    Posted January 28th, 2006 22:00

    No I can't.  I am trying to do a clean install of Windows XP Media Edition from Dell.  It is after the Windows setup window initializes and I get the error first thing.
  • annieb6427

    14 Posts

    298

    0

    Posted January 28th, 2006 22:00

    Also, I have used numerous other Win XP discs that give me the same story.  It's not a scratched disk.  I am going to update the bios.  I also retested the memory with Memtest86 v. 1.30 and everything passed.
  • hunterelite

    141 Posts

    298

    0

    Posted January 29th, 2006 02:00

    so u r booting from the disk at startup...right?
  • annieb6427

    14 Posts

    298

    0

    Posted January 29th, 2006 04:00

    I finally got through to the hardware tech and they are sending me 2 sticks of memory.  I won't get them for about 10 days.  I am not holding my breath but I do feel a little better.