UNSOLVED

Racey1979

updated

18 years ago

R

Racey1979

52 Posts

0

11424

July 14th, 2008 15:00

Wont boot with 4 gb of ram.

Hi, I purchaced some ram for my 720 h2c today and im having nothing but trouble. The ram is ocz PC2 8500 DDR 2 (2 x 2GB modules). I am running windows Vista 64 bit. The ram is EPP ready but it will only boot with 2gig. When I put 4gb in, I just get blue screened on start up. I was running 2 x 2gb of reaper pc2 8000 before (non epp) and had no trouble. Can anyone help??

 

Many thanks

 

Andy

  • Davet50

    6 Operator

    •

    14442 Posts

    232

    0

    Posted July 14th, 2008 16:00

    What is the voltage requirements for the ram stick in both  EPP and non EPP. also if you can provide a link to the ram modules you bought.

     

    Have you used ntune/esa software to go into the advanced bios settings to disable the spread spectrum settings?

     

    You may need to contact OCZ and have them provide you with modfied SPD's to run the ram at 1066 with four sticks in.

  • mystblade

    30 Posts

    232

    0

    Posted July 14th, 2008 19:00

    Vista 64 bit will not boot with 4 GB of ram there is a patch by microsoft out there.

     

    What you have to do is boot up the PC with 2 GB of ram, go get the specific patch only I forget the KB number.  Then install it and reboot the machine.  Then shut it back down and re-install all Memory Modules and start back up the PC and it should be fine.

     

     

  • C3PO5

    2 Intern

    •

    2693 Posts

    232

    0

    Posted July 14th, 2008 20:00

    Hi Andy

    Start by reading this link for a fix with 4 gig,s of ram and Vista 64 bit !

    http://support.microsoft.com/kb/929777

    Good Luck

    Message Edited by C3PO5 on 07-14-2008 02:11 PM
  • Davet50

    6 Operator

    •

    14442 Posts

    232

    0

    Posted July 14th, 2008 20:00

    Boot up with 2gigs and install SP1. put other two back in works fine..
  • Racey1979

    52 Posts

    232

    0

    Posted July 14th, 2008 20:00

    Ok, many thanks to you all. Will try in morning when I finish work. Let you know how I get on.

     

    Andy.

  • Racey1979

    52 Posts

    232

    0

    Posted July 15th, 2008 20:00

    Downloaded SP1, problem solved!

     

    Many thanks.