
UNSOLVED
SC
steve clarke
3 Posts
0
14145
August 12th, 2006 21:00
WinTV GO Plus TV Tuner Card
I have a ATI Radon X600 256MB HyperMemory card on my machine purchased in June 2006. Have a Dell E510, the card was the one I ordered with it.
Just bought a WinTV Go-Plus TV tuner card today.(8-12-06) Put the card in and followed Hauppauge's instructs to a tee. Windows found the card, ran the software with the drivers, program, etc..., and all went well.
But tried starting the program and get this message: "error: cannot locate tvtuner filter (Hauppauge WinTV TVTuner" then I get, "cannot Build FilterGraph"
Everything on here tells me the card is installed and "working properly" and the software itself from WinTV looked like it installed just fine.
Checked all the updates on my hardware from Dell and MS and have most of everything I need installed on here.(I think..)
I think I have looked through all of the updates from Hauppauge's site and have the latest drivers and program. But couldn't find anything related to my problem.
I'd appreciate any help! THX IA
Responses (5)
Solutions (0)
steve clarke
3 Posts
366
0
Posted August 14th, 2006 18:00
I have XP Pro / SP 2 installed here.As far as DVD's or other media I can view all of them just fine.The WinTV program though, installs and Windows says it's there, it just won't open past the Welcome screen then I get those messages. It's not a virurs or a Trojan, I stay on top of that stuff and I know a good deal about computers. That's why I'm stumped over this.I've Unistalled the program, changed PCI ports, reinstalled the software and I still get the same thing. I've emailed the mfg and still waiting to hear from them.Maybe I just need to take it back and try another way. I really didn't want to spend a ton of money just to watch a TV on my comp. That's what the TV is for. :-)I've read good reviews on the card and figured I had a nice new Dell it should be simple Plug-N-Play but it hasn't worked that way. If there were conflicts on here I could find them, but alas there are none anywhere. As far as the machine is concerned, it's on here and ready to work.I have Nero 7 Ultra Edition and the prog that came with the card on here and neither will let the card work.I'm on cable modem, however the modem I have is 5 years old. Works great as far as online things and no other problems with it. Do you think that may be the problem? I'm not sure.Thanks for responding "NAG"! If you have any suggestions or need any more info just tell or ask! I'd really like to see this $50.00 card work for me like it seems to have worked for others!not a genius
57 Posts
366
0
Posted August 14th, 2006 19:00
Since you mentioned your cable modem, I have to ask this question. How do you have your cable hooked to the tuner card? You need to split it before your modem. Also, do you have digital cable, if so you will have to connect the tuner to the set top cable box.
Also, before reinstalling try running this program:
Go to:
http://www.hauppauge.com/Pages/support/support_pci_878.html
Scroll down to Utilities and download the program HCWCLEAR and run it per the instructions.
I really find it odd that the program is crashing on opening though. I would stick with getting it to run with WinTV before messing with Nero. Is it crashing without anything plugged into the tuner?
Edit: I have a 5150 basically an E510, with a Hauppauge PVR150 in it, which I would recomend over the WinTV Go, if you don't want a remote or anything you could get a PVR150MCE for not much more than $50.Message Edited by not a genius on 08-14-200603:56 PM
steve clarke
3 Posts
366
0
Posted August 14th, 2006 21:00
Hey "NAG"
Thanks for all your help!
Here's some more info on what is happening.
When I got the new Dell it came with only 3 PCI's. One has the graphics card the other is a Fireware port IEEE1394 for my Digital Video camera. Then one slot between the two is open. I've placed the WinTV card in the open one and after hours of using the "HCWCLEAR" and taking the card out, setting it back in, and getting the drivers back on here and the prog won't work.
Then I took the IEEE 1394 out of it's slot and placed the WinTV card into that one. Before all that of course I "cleared" all Hauppauge's stuff off of here.
Then I reinstalled all the drivers and software and the same thing happens. It's on here..., it just won't work. ( Havent tried the IEEE port once I moved it though, so not sure if it will work out of the open port I put it on. I can always change that though if it doesn't...)
This is the dangdest thing I've ever had to deal with on any computer.
I run a splitter to the modem, brand new one and a great one at that, and all new cable to the modem and the card. I also have a router and between the comps I have on the network they all get online and work great.
Maybe the card is bad? I've registered the card and software and emailed Hauppauge about all this so I guess all I can do is sit back and wait.
And yes NAG, it crashes just opening!! Get's to starting and dies. UGGH!
not a genius
57 Posts
366
0
Posted August 15th, 2006 00:00
Well it sounds like you covered all your bases. Sorry I couldn't be of much help.
The only other thing I can think of is a codec error, but it shouldn't present itself until you actually start watching TV, so really I am at loss. Like I mentioned before that build graph are sounds like a decoder error.
Well good luck.

not a genius
57 Posts
366
0
Posted August 14th, 2006 14:00
What operating system are you using? XP or MCE?
As a first step, I would uninstall the Haupgauge software and try intsalling it again, something might not have stuck.