
UNSOLVED
Time Date Set up re-set everytime on boot up Help
Hi Guys
GX1 1400 celeron, Geforce Graphics 256 ram A07 etc etc
Evertime I boot up I have to re-set the time and date also it shows chassis intrusion.
I normally reset the time and date everytime this happens and also disable the chassis intrusion
then Alt and B to reboot.
It`s driving me Nuts, can any body help? Is it anything to do with the Jumper settings?
Best regards
doodbrie
Responses (5)
Solutions (0)
peterfelgate_ce40d3
1327 Posts
365
0
Posted November 18th, 2005 06:00
Look at the schematics for the particular variant of the motherboard you have. The battery is thin, round and silvery with "CR2032" engraved on it, like a very large watch battery. It is the item at the bottom right of the schematics to be found here:
http://support.dell.com/support/edocs/systems/ban_gx1/jumpers.htm
Its near the front. If you have a SFF system you will need to remove the tray that holds the cdrom and floppy cuz its underneath it all. In the pictures its the round thingy that has the PLUS symbol on it down on the right bottom corner. The location is near the front where the drives are. A 3.0-volt (V) CR2032 coin-cell battery installed on the system board maintains system configuration, date, and time information in a special section of memory.

peterfelgate_ce40d3
1327 Posts
365
0
Posted November 17th, 2005 17:00