
UNSOLVED
Questions about the 8250 MB -Please enlighten me
I just purchased a 8200 system with a P4 2.4GHz 533MHz FSB and 1GB PC800 RDRAM and was very happy with both the cost and the service I recived. Yesterday while checking the status of my order I noticed my order details mentioned I got a P4 2.4A GHz CPU with my order. Wondering what the "A" signified, I went to Intel's site and learned it identifies the CPU as being designed for a 400MHz FSB. After further scrutinizing my order I also learned PC800 RDRAM is only officially supported on 400MHz FSB. Now correct me if I'm wrong, but I do belive I just purchased a 400MHZ FSB system that just so happens to be able to run at 533MHz if the CPU and memory supported it. No where was I informed of this "little" detail, and I feel sorry for others whom don't bother, or don't know any better to check for themselves. I could of purchased a 4550 and got the same performance for less. Needless to say I will be returning this unit as soon as I get it. Don't get me wrong, I have been a long time supporter of DELL and have purchased machines from them for both my personal use and for my company, but I cannot condone business practices such as these.
Anyway, sorry about the rant, this was not my original intention. Please read on as I do have some valid questions.
As long as DELL gives me no problems returning this system (with shipping paid). I think I'll give them another shot with the 8250 (allthough they are considerably more expensive) if I can enlist the help of you to answer a few questions about th 8250 as I do not want to (will not) go through this whole process again.
1. What is the maximum CPU speed supported by the 8250 mother board?
2. What is the maximum memory speed supported by the 8250 mother board?
3. Does the 8250 MB support 8x AGP?
4. Does if fully support the Intel's HT technology?
6. And last but not least, Does anyone recommend the 8250 highly??? I would go with the 3.06HT with PC1066
Thanks in advance for any info,
Gary
PS. I would appreciate if the moderator of this board would leave this posted. As this issue needs consideration from both the consumer AND the company.
Message Edited by Inkog on 11-16-2002 10:13 PM
Responses (16)
Solutions (0)
Not sure on the exact way to go about it. I would suggst calling Customer Care and posting on the Credit and Return board as well. One of the moderators on the Credit And Return page will be able to steer you in the right direction, and may even be able to set it up for you. By doing a Deilvery Refusal, you will avoid shipping costs you would incur sending the system back to Dell. I would reccomend doing so.
I think you're making the smart move by going with the 8250. I don't think it has AGP 8x, though. I have seen quite a few people return their 8200's for the 8250. Right before the 8250 came out, the 8200 was the latest and greatest. You had people with 8200's in the production phase when the 8250 came out. All of a sudden, their machine wasn't the big kid on the block, so opted to return or refuse the system and get the 8250. For some of us (myself included), we were well outside the 30 days and could do nothing about it. That's fine. It was top of the line when I bought it. I certainly cannot fault Dell for coming out with a newer model than mine. The whole issue of the motherboard being, in my opinion, substandard and proprietary is what ticks me off. Dell's systems are upgradable as far as adding hard drives, optical drives, and changing video cards, but the motherboards are non-standard and cannot be upgraded. The reason, I suspect, is economical, in that they do not want to support people who break their systems by trying to swap out motherboards. They would probably have a lot of warranty work on their hands, if that were the case. Their systems are geared toward John Q. Public, not the serious upgrader with advanced technical knowledge and upgrade abilities.
Just my 2 cents.
- The 8250 1) will probably support Pentium 4's up to 3.4GHz, but is never guarenteed to support beyond what Dell is currently offering (there were many people who felt burned with 8200s that they could not upgrade to PC1066 memory, which was never supported in that model). 2)PC1066 RDRAM. 3) No, it's 4x maximum. 4) Yes. 5)you didn't ask this question. 6) Don't have one, but am very happy with my 8 month old 8200.
Concerning the prices, check Small Business site which is currently about $400 less expensive on identical configurations of 8250s. The Home site is charging alot more for these at the moment, relative to the other models, for some reason.
The moderator doesn't remove posts unless they violate the terms of use, which your's doesn't. -Friendlyname-
2 Intern
•
858 Posts
240
0
Posted November 17th, 2002 21:00
Hi,
I would not advise setting up a refusal of shipment. If anything goes wrong as to where it goes or the time in which it gets there, you will have in some cases a few months wait to get a refund credit. I was told this by Dell Cust. service after the problems to which I alluded happened to me.
Good luck,
Jane
- Wow, I didn't know about that Jane. Good info. Didn't mean to steer anybody wrong here. You can send it back, though. And by doing so, you will be in control of how it is shipped back to Dell, and can probably request a return receipt, depending on the medium you choose.
-Friendlyname-
2 Intern
•
858 Posts
240
0
Posted November 18th, 2002 00:00
I would get the 8250, if sold for the same price as the 8200, and that, for other reasons. The upgradeability, 1066 RDRAM, integrated network card and USB 2.0, and 4 PCI slots.
Jane
Message Edited by -Friendlyname- on 11-19-2002 11:29 AM
This will give you Core stepping as well for all the P4 CPUs.
http://processorfinder.intel.com/scripts/list.asp?ProcFam=483

MViani
34 Posts
240
0
Posted November 17th, 2002 15:00
in regards to the A after the processor, I believe that Dells (P4 2.4A) is the same as Intels (P4 2.4B) my 8200 P4 2.4A has the 533fsb and i've seen it referred to as an A in some circles and a B in others, also you can Now get an 8250 with PC1066 for the same price as an 8200 with PC800. see E-value codes 6F853-D5111(0)(2)(4)or(6).