UNSOLVED

pcvix

updated

20 years ago

P

pcvix

9 Posts

0

30205

September 15th, 2006 06:00

Precision 390 - how to monitor internal temperatures, etc

I installed the software SpeedFan to monitor the voltages, fan speeds and temperatures of a Precision 390. Apparently, the Dell BIOS does not activate these hardware monitoring features, and SpeedFan only manages to report the hard disk temperature (via SMART).

Can someone recommend a method to accomplish such internal monitoring purposes?

Thanks.
  • 813

    0

    Posted October 2nd, 2006 00:00

    The current version of Everest show each cpu-core temperature on my Precision 390 (with a E6300 CPU). The Intel Thermal Analysis Tool also works.
     
    - Davor
     
  • pcvix

    9 Posts

    813

    0

    Posted October 3rd, 2006 03:00

    Thanks, Davor.

    Which version of Everest do you use, and would you happen to have an "official" link for downloading Intel's Thermal Analysis Tool? I read about TAT on various forums, but only managed to find "unofficial" download links for it.

    Thanks in advance!
  • 813

    0

    Posted October 3rd, 2006 04:00

    The last version of Everest (3.01) works with the Core 2 Duo cpu family. The link:
     
     
    With Everest, you can see the temperatures as reported by the digital temp sensors on each CPU-core, but not the "typical CPU temperature" as reported by others motherboards. I think that Dell disabled this feature.
     
    The CPU-core temperatures are always higher that the temperature reported by a motherboard sensor, so if you see values of 36-42 Celcius in idle, dont worry. Thats normal.
     
    With regard to TAT, yes, there is only "unofficial" dowload sources ;)
     
    - Davor
     
  • pcvix

    9 Posts

    813

    0

    Posted October 3rd, 2006 09:00

    Many thanks for a prompt and helpful reply, Davor!

    Would you happen to have come across the high peak "Commit Charge" phenomenon (immediately after boot-up) described in:
    http://forums.us.dell.com/supportforums/board/message?board.id=pw_other&message.id=5903

    Thanks again.

    Message Edited by pcvix on 10-03-2006 06:26 AM

  • 813

    0

    Posted October 3rd, 2006 15:00

    See the "Commit Charge" thread for my response.

    Do you proved Everest and/or TAT? The temperatures are in the range that I mentioned?

    - Davor
  • pcvix

    9 Posts

    813

    0

    Posted October 4th, 2006 05:00

    Ambient temp: 23C
    CPU 0/1: 35C (using TAT; idle - 5 min after boot-up)

    You may find the following thread to be of interest, Davor:
    http://forumz.tomshardware.com/hardware/Collecting-Core-Duo-CPU-temps-analysis-ftopict202442.html

    Cheers!
  • 813

    0

    Posted October 4th, 2006 21:00

    On my PWS I get 29/30 at idle, 20C Amb. temp. TAT and Everest show the same values. CoreTemp sometimes gives lower values (2-3C).
     
    Nice forum at THG!. There are some guys who get 50C at idle with a E6300 CPU o_O
     
    After reading some posts at THG I think that Dell have a good temperature control system in the PWS line (And it's very silent). :D
     
    - Davor