UNSOLVED

shiloh_f

updated

19 years ago

S

shiloh_f

2 Posts

0

17095

September 14th, 2007 14:00

My Dell Dimension 2400 PC won't turn on. No lights

The other day my screen froze on pc.  It didn't seem to be recovering and i couldn't turn off pc the normal way so i tried pushing the power button.  Nothing..stayed on.  So i unplugged from surge protector and plugged back in.  Now there was an amber light flashing only.  Fan wasn't running.  Just the amber light flashing.  I called Dell Support from work and they said they couldn't help me until i got home so they could run diagnostics tests on my computer.  I scheduled a 5:30pm call back but no one called me!!  Soo I called a friend who has a computer store and he tried helping me over the phone.  After checking what he told me to check,  he concluded the power supply needed replacing.  Fan doesn't turn on...no led lights are on....no power or hard drive light comes on.  He had me remove all connections from power supply unit to mother board and unplug from surge protector and test the power supply with a paper clip to see if the fan would come on.  It didn't.  Is he right?   No lights on front or back...surge protector works because the monitor power button comes on when pushed.  No sound at all...is like i didn't plug into electricity.  I would hate to buy a power supply unit and find out that isn't the problem at all.  Thanks for any help anyone can give me
  • techfanatic

    87 Posts

    456

    0

    Posted September 14th, 2007 15:00

    there are only two possibility : 1 is the fan and the other is the motherboard but since you see a light on the power. it would really be a fan issue
  • shiloh_f

    2 Posts

    456

    0

    Posted September 14th, 2007 16:00

    There are no lights anywhere now.  Drained power from tower.   Supposed to be a green light on motherboard that shows power supply is working.  No light there either.  Where there is supposed to be a light there is none. 
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    456

    0

    Posted September 14th, 2007 17:00

    From the 2400 user manaul:
    (http://support.dell.com/support/edocs/systems/dim2400/en/F75560LRs.pdf)
    IF THE POWER LIGHT IS BLINKING AMBER — A device might be malfunctioning or incorrectly installed.
    • Remove and then reinstall the memory modules (see page 64).
    • Remove and then reinstall any cards (see page 51).
    • Remove and then reinstall the graphics card, if applicable (see page 51).


    If none of that helps, you can try this. Disconnect PC from the mains. Slide the voltage selector switch on rear of the tower back/forth a few times. Make certain it's set to correct voltage at your location before reconnecting PC to the mains!! And if it still doesn't work, you likely do need a new power supply.

    Ron