
UNSOLVED
F
Fushia_groan
18 Posts
0
619
May 10th, 2005 14:00
Issues with printer
I am experiencing difficulty with my printer. I have owned a Dimension 8400 for almost 6 months now and am using the printer which was supplied with it (I assume someone will hopefully know the make of printer, as all I can find is 'Dell').
I am now unable to print, as the paper only seems to feed down one side, and jams. There does not seem to be anything blocking inside, and different paper types don't give a different result.
I have a black ink cartridge below the minimum level, so can this be a reason? Sorry, I'm not very technical. I would really appreciate some help with this ASAP as I am a student and am unable to print out my coursework.
Responses (6)
Solutions (0)
Fushia_groan
18 Posts
197
0
Posted May 10th, 2005 15:00
Sorry, have found the info - Photo all in one printer 922.
What I do notice is that there is only one rubber roller on the right hand side - not one on the left. Is this normal?
Thanks,
tonebalone
1 Rookie
•
1372 Posts
197
0
Posted May 10th, 2005 16:00
If this was ordered with your Dell computer, then it probably has the same warranty. You can probably get Dell to repair/replace it. Check this owner's manual for warranty info:
http://support.dell.com/support/edocs/systems/PRN922/en/OM/922_en.pdf
I can't help you further, since I don't have a 922 to look at. Maybe other forum members can give you advice concerning your feed roller(s).
Good luck!
Fushia_groan
18 Posts
197
0
Posted May 10th, 2005 16:00
Thanks a lot for the advice... My PC is under a year old so is still under warranty, so that's not an issue. I would like to know if this is a problem I can deal with myself though, as I need it fixed ASAP.I have tried contacting Dell through the Online Help but it says that I have cookies blocked (although I dont).
@Fushia_groan wrote:
I am experiencing difficulty with my printer. I have owned a Dimension 8400 for almost 6 months now and am using the printer which was supplied with it (I assume someone will hopefully know the make of printer, as all I can find is 'Dell').I am now unable to print, as the paper only seems to feed down one side, and jams. There does not seem to be anything blocking inside, and different paper types don't give a different result.I have a black ink cartridge below the minimum level, so can this be a reason? Sorry, I'm not very technical. I would really appreciate some help with this ASAP as I am a student and am unable to print out my coursework.
Try posting on the Dell Inkjet Printer forum, this forum is for Dimension Hardware issues.tonebalone
1 Rookie
•
1372 Posts
197
0
Posted May 10th, 2005 17:00
Try loading one sheet at a time and see if this improves the situation.

tonebalone
1 Rookie
•
1372 Posts
197
0
Posted May 10th, 2005 15:00
Without a model, all I can give you is generic advice. Usually, a skewed feed can be caused by dust buildup on the feed rollers. Try to find a couple small rubber rollers which contact the paper and pull sheets into the paper path, and give them a wipe with an alcohol-soaked rag or tissue. Not the good stuff, save that for after finals. Use isopropyl.
Low ink level won't cause a jam.