UNSOLVED

Jim Hill

updated

25 years ago

JH

Jim Hill

77 Posts

0

5320

January 2nd, 2002 05:00

Installing a New Hard Drive in a XPS M200s

I’m preparing to install a new hard drive in a XPS M200s using Windows 95, but don’t know how to use the floppy disks created with the Dell Program Disk Maker. The titles of these disks ‘Intel Configuration Utility’, ‘Matrox MGA Millenium PCI Video Drivers’, etc. sound like essential data is included. <ADMIN NOTE: Broken link has been removed from this post by Dell>  tells how to install Windows 95, but says nothing about using the Program Disk Maker disks.

Another question: The existing drive is partitioned into three letters, It’s pretty buggy, to where a clean install is needed. The normal approach is to use fdisk, but wouldn’t it be easier to just reformat each partition, starting with the two logical partitions.

Ignore the information listed below. It applies to my other computer.


  • Denny Denham

    2 Intern

    •

    18798 Posts

    178

    0

    Posted January 2nd, 2002 15:00

    Jim Hill,

    The disks made with Program Disk Maker contain copies of your drivers. Most, if not all, of those drivers will also be available to you on CDs received with your system or as a part of Windows 95. If they are not, you can download them from the Dell downloads site. When I reformatted my 266MHz Win95 system I did not use the floppies created with Program Disk Maker.

    If the partitions on your existing hard disk (which you describe as "buggy") are only cluttered and disorganized, it will in fact be easier to simply format them than to fdisk and repartition the hard disk.

    Sorry, your browser doesn't support Java.






    Are you a new computer owner, or simply new to Delltalk? You may find some helpful information on how best to use this forum here.
    Want to make a hyperlink in your post, want to add a graphic or sound file, need to troubleshoot a non-working Java applet, want to build an attractive signature? These capabilities can be yours if you visit Denny's DellT@lk Tutorials.
    For help in deciding what can be eliminated from your Startup list, take a look here.
    Want to get rid of Network Neighborhood, change your Registered Owner name? Check out the little utilities at Delltalk Tweekz.
    Ready to sign up for Web server space? Want to learn FTP? Visit Web Presence for Beginners.
    For new users (or veterans who would like to help a new user), a number of basic Windows tasks are illustrated in Denny's Tutorial Viewlets.

    Note: I do not answer Instant Messages but I do answer email.
  • 178

    0

    Posted January 3rd, 2002 19:00

    Hello Jim, may I suggest once you have 95 installed and the programs, follow this :

    Memory table based on total system RAM

    RAM size(mb) VCache size(k) Swap size(mb)
    16 4096 32
    32 8192 64
    64 16384 128
    96 24576 192
    128 32768 256
    256 65536 512

    (Calculate RAM/4=VCache; RAM*2=Swap)

    Difference for Windows 95

    Double-click on My Computer. Double-click on C: drive. Find and rename AUTOEXEC.BAT and CONFIG.SYS to something else.
    Double-click directory Windows. Double-click directory Start Menu. Double-click directory Programs. Click on File à new à folder. Name it Disabled.
    Double-click directory Startup, click on Edit à select all, click on Edit à Cut, go back to directory Programs, double-click directory Disabled, click Edit à Paste, close open windows.
    Click on Start à run and type WIN.INI and click OK; put a –( - in front of the "run=" & "load=" lines, click on File à save then exit win.ini.
    Click on Startà run and type regEdit and click OK.
    Click on the (+)'s by: HKEY_LOCAL_MACHINE à Software à Microsoft à Windows à CurrentVersion and loOK for the "Run" folder, right-click "run" à rename hit the right arrow on the keyboard (to get rid of the highlight) then put a "-" after the "run", hit enter, do same thing to "RunServices", exit registry.
    Click on Start à shutdown à Restart à OK (reboot)

    Go to Start à run and type in SYSTEM.INI and click OK; scroll down To the [386enh] category. at the Bottom of that category type this.

    MinSPs=12

    Next, scroll down till you see the category [VCACHE]. Type under it:

    MinFileCache= (vcache size)
    MaxFileCache= (vcache size)
    ChunkSize=512

    Click on File à save then exit SYSTEM.INI

    Right-click My Computer à Properties and click on Performance.
    Click File system and change typical role of this machine from Desktop Computer to Network Server. Click on OK.
    Click virtual memory click on þ (Let me specify my own virtual memory settings).
    Change both minimum and maximum from what they are to (swap size) click OK, say "Yes", click close (reboot).

    Click on Start à find à Files and folders
    Look in C:\ and find Files named: *.tmp, ~*.*, *.chk
    Click on Find Now.
    Click on Edit à select all, hit shift+delete.
    Click on Start à Shutdown, choose Restart, hit "OK", You're done.


    Dell Dimension 4400
    1.7 Ghz
    512 mb DDR RAM
    80 Gig HDD
    48xCdrom
    CDRW
    Nic , GeForce 3
    Soundblaster Live
    + MORE....