
UNSOLVED
HELP! HP 2175 All-in-one prevents my Dimension from starting up!
Hi, all. Hoping someone can help.
If I have my HP 2175 all-in-one printer connected to my Dimension (via USB), when I turn the PC on, it hangs. As soon as I unplug the USB cable, everything loads fine (I don't even need to turn the PC off!). If I connect it once the computer gets going, again, everything's fine, and I can print just fine.
I went to the HP site, and they said there were issues with Dimensions and HP printers, but wouldn't say anymore, other than I may need to upgrade my BIOS; also that it wasn't their fault.
My specs:
Dimension 4550
Windows XP
Any suggestions?
Thanks!
Responses (6)
Solutions (0)
Dragons and Dre
40 Posts
238
0
Posted April 11th, 2005 02:00
Unplug the printer
Go into BIOS
Go into Integraded Devices
Turn off USB emulation
Save and restart
Plug back the printer.
See if your problem is fixed.
- Dragons and Dreams, the "USB No Boot" is the recognized fix for this problem and was originally provided by a Dell Moderator over a year ago. It has fixed everyones slow boot problems because of USB, that I know of.
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio application Dragons and Dre
40 Posts
238
0
Posted April 11th, 2005 20:00
I see, thanks for the heads up. Tried looking at the a 4550 here though but there are no option on "USB No Boot". The only thing I can see that might be near it is usb emulated. Am I missing something?
I think it depends on what BIOS you have; I'm running A05, and I had to follow the steps almost exactly as Dragons & Dreams laid out; going into Integrated Devices first is key (that's where you flip the switch for USB No Boot).
I figured a fix would be posted somewhere, but if you search on any of the terms specific to my problem -- HP 2175, Dimension 4550, etc. -- nothing would come up. Hopefully now it will, in case anyone else has the same problem.
Again, thanks all for being so helpful!!

fireberd
11 Legend
•
33399 Posts
•
112848 Points
238
0
Posted April 9th, 2005 09:00