UNSOLVED

jlestochi

updated

25 years ago

J

jlestochi

1 Message

0

1193

July 8th, 2001 16:00

Dimension with no POST???

I'm working on a Dell Dimension (P120), attempting to upgrade it from 32MB to 64MB. The machine worked fine when I started. (I hate when that happens.) I upgraded the memory with 2 new 32MB SIMMs in banks 0. Now when I power up the system I get power to the drives and the power LED stays on, but no POST beeps or video. The system hangs.

I went through this web site and tried the steps to reseat the processor, remove all components and memory, remove the battery for a minute and power up. Without any components in place I get 3 long beeps as soon as the power goes on. I can add all original components back except memory and I still get the 3 long beeps. As soon as I add the memory (either the new SIMMS or the original SIMMs) it reverts to no POST and no video again. I tried swapping the interated video with a regular PCI video card with no luck. I can't find any info on the meaning of the POST beeps.

Any help would be GREATLY apprecitated! Joe

  • PCHelpLIVE

    15 Posts

    113

    0

    Posted July 9th, 2001 04:00

    Hi,
    This has happened to me too. Not on a Dell but the no POST issue. Check the RAM I bet it is a bad stick of RAM. Put that RAM on another sytem if you can to test it.




    Kevin

    Get free PC help, drivers, how to's, and more...
    PCHelpLIVE.com
    http://www.pchelplive.com