UNSOLVED

Thejugg

updated

21 years ago

T

Thejugg

6 Posts

0

13352

February 19th, 2006 15:00

Dimension 9150

I have not ever purchased a Dell and am considering the 9150 for our small business. We have several machines on our network that all get accessed through an electronic switch. I noticed that Dell has an option for serial port and PS2. I have called Dell several times and can not get a straight answer as to whether it is an actual PCB that emulates a serial and PS2 port or is it just the receptacles on a frame with connectors to the main PCB ? Is this 1 or 2 PS2 ports ?
 
Anyone have any experiences with the new BTX chassis and the Pentium D running too warm ?
  • PETER345

    1 Rookie

    •

    5796 Posts

    510

    0

    Posted February 19th, 2006 17:00

    I have the 9100 with 3G PD. It runs great. Very cool and quiet even at both cores are full load. Much better than my 4550 with 2.4G P4 Northwood.

    The 9100 (and I presume 9150) has a connector on the motherboard for the PS2 and serial connector. Hence it appears to be a motherboad function, not an addin card. I did not get it, so I can't say for sure. It is only $10, which leads me to believe it is just a cable and connectors.

    Peter
  • Thejugg

    6 Posts

    510

    0

    Posted February 19th, 2006 21:00

    Thanks for responding & I have to agree with you with it being a main PCB function (especially it being only $10)  which typically should be the case. I have looked everywhere for HW specs and pictorials on this w/o much luck.
  • 510

    0

    Posted February 25th, 2006 16:00

    ..... sorry to say YOU and I are among HUNDREDS of NEW Dell Dimension 9150 owners that either forgot to order or did not realize the SERIAL PORT was NOT included.  After all, it's usually included in EVERY high end computer, along with a PARALLEL PORT connector.  My Wife's Dell Dimension 4700 has BOTH and that is only six months old and HALF the price of the 9150 !!  Now I guess I can see the reason for Dell and other computer manufacturers eliminating the PARALLEL port, but the SERIAL PORT ????  There is always a device that "needs" the good old fashion DB9 SERIAL PORT.  I have a great external U.S. Robotics "V.Everything" modem I use for sending and receiving faxes.  Now where the heck do I connect it on my new 9150 ??  And WHY should I have to purchase an entire SERIAL PORT BOARD from a computer dealer that will take up one PCI slot and also cost me around $25 ????

    OKAY DELL, WE MADE A MISTAKE, WE APOLOGIZE....... WE ARE TRULY, TRULY SORRY..... PLEASE, PLEASE FORGIVE US FOR NOT ORDERING THE OPTIONAL SERIAL PORT......... YES, WE ARE FOOLS....... PUNISH US ANY OTHER WAY EXCEPT REFUSING TO TELL US THE DELL PART NUMBER FOR THIS OPTION WE WANT TO PURCHASE NOW !!!!!!!!!!!!!!!

    Am I the ONLY one that feels this way............. huh ????????????
  • Thejugg

    6 Posts

    510

    0

    Posted February 25th, 2006 20:00

    Thanks for the reply !!  It's too bad that there are so many uneducated Dell customers out there that are unaware of this problem and the potential problem that this creates. It is basically a $10.00 fix for them to incorporate. I suppose that on the other hand Dell is thinking cost and with everything being usb nowdays why screw around with PS2's, Serial and Parallel Stuff when usb is cheaper to produce. Only problem is that there are too many people out there with old stuff that is not broke and works for them but needs to work with the new stuff too. Maybe the other problem is the main PCB's  that Dell is using for their systems are maybe "cheap" and don't support much. Sometimes a machine can be build using all the "stuff" that you want but there are very few hardware vendors out there that support "BTX" chassis and everything that you are looking . Other wise contend with Dell or make a good "hot machine" yourself that has boo koo fans to keep it cool and sounds like a jet taking off.

    HELLO !!  CAN YOU HEAR ME NOW !

     

  • Flatnose

    93 Posts

    510

    0

    Posted February 27th, 2006 01:00

    Hi FloridaWen

    Im look at the 9150 and was seeing what others had to say about it.
    You said you were waiting for the BenQ 1650 retail to come out. Did you know that the BenQ 1655 was out. Also if you have not gotten your Sony DRU-810a drive yet don't. imo the new Sony DRU-820A is a better drive than the Sony 810a and the BenQ 1655. The new Sony 820A seems to be a BenQ 1670(not out yet) and I have not seen better burns on R-5 or R-9 yet plus the new Sony 820A will burn DVD-Ram. The Sony 820A also supports book type change but as of now it will not support BenQ QSuite but imo there is little need for QSuite with the Sony 820A.

    btw how is the cooling on the D-9150?
  • 510

    0

    Posted February 27th, 2006 02:00

    Hello "Flatnose"..... nice to hear the reply from you !!  I have the Sony DRU-810A in another computer at the moment.... it's a BenQ DW1640 "rebadged" with Sony firmware and working fine.  I constantly monitor CD FREAKS Forum posting Q & A there.  I am well aware of the BenQ 1655 retail and OEM.  I watched them since they first came out and the selling price kept going up, up, up as demand increased.  Started at around $37 (OEM) and up to over $60 now !!  I could have grabbed one real cheap but I NEVER wanted "Lightscribe"... not at all !!

    YES, I am aware the new Sony DRU-820A is a rebadged BenQ 1670.  At first they all thought it  might have been a rebadged Lite-On, but now they are sure it's a 1670 by looking inside at the chipset.  Man that D60Q was a piece of garbage.......

    The folks on CDFreaks told how to REFLASH Philips, Sony, etc. that are "rebadged" BenQ's with real BenQ FIRMWARE.  I tried it to a Philips (BenQ 1620 rebadge) in my Wife's Dell 4700.  Made it 200% BETTER with the BenQ firmware !!  I am very tempted to reflash my Sony 810 to the BenQ 1640 firmware.  Can then use QSuite and other stuff (I heard!!)  Still deciding ??

    I am anxiously waiting for the BenQ DW1650 to be sold here in the USA.... along with THOUSANDS of other anxious people.........  They say a MARCH (USA) release date....... well next week is March !!  I am going to BUY RETAIL DW1650 and NOT OEM version.

    WHY do you ask about 9150 "HEAT PROBLEMS"........... something I should be aware of ????  I am running TWO SATA-II 160G  HD's (RAID1) which definitely add to the heat situation.

    FYI- the thread for CDFreaks Sony 820A (BenQ 1670) discussion is:

    http://club.cdfreaks.com/showthread.php?t=166054&goto=newpost

  • Thejugg

    6 Posts

    510

    0

    Posted March 19th, 2006 23:00

    Thanks for the feed back on the 9150. I strongly considered it but settled on the Optiplex 620 because of tighter specs and NTFS is also available on the  HD among other nifty features that can be discovered if you spend the time looking in depth. I liked it for the main PCB design and especially the BTX chassis. I finally found the solution to the optional serial and PS2 ports. Dell has told me many times that it occupies 1 of the 16b full height slots on the main PCB. IT DOES NOT !!. It is a small PCB attached to one of the PCI slot filler plates and from there a ribbon cable is attached that goes to the main PCB. I just recieved my machine 3 days ago and it came in damaged with the back of the chassis all bent and screws and parts floating around. I didn't even make an attempt to power up do anything except call Dell and DOA it.

    Looks like a real good design inside. See ya keep in touch. I'll let you know how this thing works in reality as soon as I get a non DOA