UNSOLVED

coyley1

updated

20 years ago

C

coyley1

15 Posts

0

17363

August 17th, 2006 14:00

Dimension 8400 Fails to boot

Hi,

I have a Dimension 8400 and when I switch on the processor fan runs at full speed and sounds like an aeroplane about to take off.

The fan just runs and the system does not boot up. I called to Dell technical support who told me that the fan needs replacing.

I question this as the fan is running but seems out of control. Anyway I Ordered one for £58 and it was sent the next day today Aug 17th. I fitted the new fan and lo and behold it does the same thing just runs at full speed and the PC fails to boot.

I will be getting back to Dell Support but wondered if any of you real experts can point me in the right direction. Is it a Motherboard problem. (PC is only a year old) The service cover expired in April 2006.

Thanks for taking time to read my problem, have a good day

Mike.

  • coyley1

    15 Posts

    292

    0

    Posted August 17th, 2006 15:00

    I asked the service guy how is it the processor fan when it's clearly running. I was told it was the fan. So ordered a replacement.
    I was not at all surprised when the new one acted the same. As I have no faith in the information given I thought I would ask you guy's before buying a very expensive new motherboard.
     
    When I turn on the PC all that happens is the processor fan whines away at high revs. The PC does not boot.
    If I disconnect the fan and turn on the PC it does not boot although the power supply fan is running and the green light is on the MB. I do not keep it on incase I harm the processor.
     
    What I really want to know is it the whole MB that needs replacing or just a component on it. Dell have quoted me �125 plus tax and delivery for a new MB, the old one is only 16Mths old.
     
    Thanks,
    Mike.  
  • elmerCR

    7 Posts

    292

    0

    Posted August 17th, 2006 15:00

    As I read your post my first question was, why would they send you a fan if your computer does not boot? It does not sound like a heat problem if the fan is working at "full speed". The board/bios controls the fan. Does your computer boot to the BIOS at all?
  • maneu

    13 Posts

    292

    0

    Posted August 17th, 2006 17:00

    Coyley1, you didn't answer Elmer's question; does your computer boot to the bios? also, have you check the power in the monitor, did you try another monitor, did you check all cables and connectors to make sure nothing came loose. these are the basics to check for. In the back of the computer there are a set of 4 lights (A, B, C and D) these lights must all be green if not, tell us what lights are green and what lights are yellow.

    Hope this helps, maneu 

  • coyley1

    15 Posts

    292

    0

    Posted August 17th, 2006 18:00

    Hi ejn63,
    Have checked capacitors no obvious signs of damage, bulging leakage etc. Cannot see any damage, burnout on the MB at all.
    Have checked all leads connections etc.
     
    Is it looking like a U/S MB?
     
    thanks for your time,
     
    Mike
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    292

    0

    Posted August 17th, 2006 18:00

    Given the model, check the capacitors (can shaped devices on the mainboard) for bulging or leaks. The tops should be perfectly flat - if any are bulging or leaking a brown goo, the mainboard needs to be replaced.
  • coyley1

    15 Posts

    292

    0

    Posted August 17th, 2006 18:00

    Hi maneu,

    Unable to boot to bios. None of the lights (ABCD) are lit.

    Have checked all connections, just get processor fan blasting away.

     

    regards,

    Mike.

  • shesagordie

    12 Elder

    •

    46017 Posts

    292

    0

    Posted August 17th, 2006 19:00

    coyley1

    You could try removing all the PCI cards, video card and memory, disconnect the IDE/SATA and FD power and data cables, then check that the front panel cable is connected to motherboard, with nothing else connected to the case, except the power cable and then power the system on. If you do not get any beep codes or any LED's on the back panel, then it would appear that the motherboard has died.

    If the LEDs light up and there are beep codes, then add the parts one by one, rebooting the system after each part is reinstalled and rechecking that the LEDs etc, still work.
     
    Bev.
  • coyley1

    15 Posts

    292

    0

    Posted August 18th, 2006 06:00

    Thanks Bev,

    I will give it a go over the weekend. Will let you know how I get on next week.

    Does anyone know if it is wise to buy a new MB from Dell as the cost seems very high. £125 plus VAT and delivery over £150.

    I have seen top spec MB's for much less.

     

    Appreciate everyones help, thank you

    Mike.

     

  • shesagordie

    12 Elder

    •

    46017 Posts

    292

    0

    Posted August 18th, 2006 20:00

    coyley1
     
    This may be cheaper, you can buy a new Dell OEM Dimension 8400 motherboard for US$29.00 from this vendor and they will ship to the UK,
     
     
    Bev.
     
    Ps. I've been purchasing parts from Centrix and never had any problems with them.
  • coyley1

    15 Posts

    83

    0

    Posted August 19th, 2006 14:00

    Bev,

    Thats an amazing difference in price I will have a look.

    Thanks very much,

     

    Mike.