UNSOLVED

kavkev

updated

22 years ago

K

kavkev

11 Posts

0

45899

November 6th, 2004 02:00

Dimension 8400 does not show clear fonts on E193FP Monitor

I just got Dimension 8400 with 128MB PCI Express x 16 (ATI Radeon X300 SE) video card
with 19 inch Flat Panel Monitor (Model E193FP) last week. For some reason fonts are not very
clear on different type of windows (e.g. command prompt, Internet Explorer, Control Panel Window
etc.). Font looks very hazy and not very sharp and crisp. I called Dell Support and they
couldn't find anything wrong so they decided that monitor might be defective and send me new monitor of same type. I just tried new monitor and I am still having same problem. I am using
default setting as I didn't change font setting or settings on monitor. There is no electro-
magnetic device near by.
 
Any suggestions to resolve this problem??? Thanks. 
 
 
  • 1Bowtie

    723 Posts

    1051

    0

    Posted November 6th, 2004 14:00

    Hi kav

    You might try right clicking the desktop, go to properties, settings tab, on the left side set your screen resolution to whatevers comfortable to your eyes, like mines set to 1280x1024, to the right set to highest color 32bit, then go to advanced and there are tabs in there for other changes. Hope this helps:smileyhappy:

  • kavkev

    11 Posts

    1051

    0

    Posted November 6th, 2004 15:00

    Thanks.. I tried changing screen resolution from default "1024 by 768 pixels" to "1280 by 1024" or other values but that made problem worst.
     
  • kebabmaker

    70 Posts

    1051

    0

    Posted November 6th, 2004 19:00

    go to display properties, click appearance tab, click effects button.
    under "use the following method to smooth edges of screen fonts", make sure standard is selected.
    also, if the monitor supports dvi make sure you've connected with the dvi cable (white plugs). does this solve the problem?

    Message Edited by kebabmaker on 11-06-2004 09:49 PM

  • kavkev

    11 Posts

    1051

    0

    Posted November 6th, 2004 20:00

    Yes. The method to smooth edges of screen fonts is already set to "standard". Thanks.
  • JDre

    1319 Posts

    1051

    0

    Posted November 7th, 2004 01:00

    Uncheck the "use the following method..." box so No smoothing is selected, then OK, then Apply, that will fix your problem. I tried it on my PC, and I saw the blur, and then removed it. 1280 by 1024 at 60 hz will provide the best clarity.
  • kavkev

    11 Posts

    1051

    0

    Posted November 9th, 2004 01:00

    I tried unchecking "use the following method...", but didn't help.
  • kebabmaker

    70 Posts

    1051

    0

    Posted November 10th, 2004 12:00

    have you tried updating your video card drivers. download the latest ones from www.ati.com, uninstall the old ones using ati software uninstall in add/remove programs, run driver cleaner http://www.drivercleaner.net/download/DC3Setup_33.zip (follow instructions in readme) and install the new ones. maybe this will work???
  • kavkev

    11 Posts

    1051

    0

    Posted November 10th, 2004 21:00

    I have another Dell CRT monitor. I connected that my Dimension 8400 and I didn't see the
    problem. I don't think problem is with driver. It is problem with E193FP Monitor. Dell
    sent me another identical monitor and it had same problem. I think this monitor has
    some defect. Hopefully, Dell support will find solution. Thanks.
  • kebabmaker

    70 Posts

    1051

    0

    Posted November 11th, 2004 09:00

    still, it may be the driver i'm surprised dell technical help hasn't told you to update it. it's worth updating especially if you're connecting to the flat panel via the dvi port and the crt through the vga port since the two might differ. have you tried connecting to the flat panel via vga and dvi seperately and had the same problem? have you set the resolution of the flat panel to the maximum possible since this will provide the optimal image quality?
  • kavkev

    11 Posts

    732

    0

    Posted November 11th, 2004 14:00

    Thanks. This flat panel monitor does not have connector for DVI cable. There is only

    one connector which is 15 pin. Thanks...