
UNSOLVED
Dim 8300, blank screen with 6600 GT card (AGP)
Hi,
I bought a Inno3d Geforce 6600GT AGP card a couple of weeks ago and can't get it to work.
As soon as I attach the card the monitor goes into sleep mode. The system boots up but the monitor stays black. First I thought it might have something to do with the PSU and lack of power, so I've bought a new 425 W PSU from PC&Power Cooling. Still the same result.
I've also resent the card to the retailer which have tested it without any problems !!
If I attach my old 5200FX card everything works fine.
I've checked that the card and all cables are securely attached and I have followed the instructions that came with the card (uninstall previous drivers etc).
Could it be a monitor problem? Is there some bios setting that needs to be set? The old 5200 card is also an AGP card and that one works, so I can't figure out any "special" bios settings needed.
I'm getting pretty desperate here.
Does anyone have any ideas?
Any help would be most appreciated.
Thanx,
Peter
My specs:
Dimension 8300 P4 3Ghz
1,5 GB RAM / 120 GB HD
425 W PSU (Turbo-Cool Dell)
Inno3d Geforce 6600 GT
Dell M872p 17 "
Responses (7)
Solutions (0)
- Hi Peter,
I'm afraid I can't help you as I'm getting almost exactly the same problem!
I have the same Inno3d Geforce 6600GT AGP card and get exactly the same problem in my Dim 4600. I thought it might be the lack of power, as you did, and got a new PSU (400W). I have followed the instructions precisely in the manual. I also have a GeForce FX 5200 which works perfectly fine when I re-install it.
I too am getting pretty desperate. Any advice gratefully recieved.
Sim.
Dimension 4600 P4 2.8Ghz
512 MB 3200 DDR memory
80 GB hard drive
Windows XP Home Edition (SP 2)
GeForce FX5200 AGP
Dell E773p monitor. - a likely problem is its not seated correctly. remove the agp card and make sure its got no dust in the slot, reseat the card... make sure everything is pluged in
and also does your screen show anything on start up? what colour are the dianostic lights?
Dimension 8300
P4 2.80GHz 800MHz w/HT BIOS A05
1GB PC3200
Sparkle 6600GT oc (500mhz/1000mhz)
Creative SB Audigy 2 ZS (retail)
Seagate sata 120Gb, sata 160Gb, USB2 external 200Gb
NEC DVD+RW ND-2100AD
Pioneer 16x DVD+/-RW DL DVR-109
BearPaw 2400TA Scanner
USB 2.0 tv tuner
HP usb CD-Writer+ 8200
256Mb-64mb Usb drives
Wacom graphire3 4x5inch
Conexant SmartHSFi V.9x 56K DF PCI Modem ,ADSL DSL-200
HP deskjet 3550
15inch LCD
pci cooler
3dmark03 8446...3dmark05 3498...PCmark05 3448 - In my case, I get nothing on screen (no start-up screen) and all the diagnostic lights are green. I've tried reseating the card on a couple of occasions but to no avail.
Dimension 4600 P4 2.8Ghz
512 MB 3200 DDR memory
80 GB hard drive
Windows XP Home Edition (SP 2)
GeForce FX5200 AGP
Dell E773p monitor. - SR45, Yes, I've hooked up an extra power cable to the card.
I've also checked that the card is seated properly and there is no dust or anything in the slot. And the 5200 card is working so I don't think this is the problem.
I also don't get anything on the screen, can't even reach BIOS. I haven't checked the diagnostic lights yet as I'm currently waiting for the card to be returned from the retailer.
As I said, the only thing that happens is that the monitor goes directly into sleep mode when I boot the PC.
Anyone, anymore ideas?
Dimension 8300 P4 3Ghz1,5 GB RAM / 120 GB HD425 W PSU (Turbo-Cool Dell)Inno3d Geforce 6600 GTDell M872p 17"Windows XP Prof. (SP2)

SR45
2 Intern
•
12138 Posts
496
0
Posted October 10th, 2005 14:00
By chance you did hook up the molex cable from the rear of the video card to an extra power cable near the cdrw or dvd drive, did you not ?
Dim 4400 ( 3 Years 4 Months, going strong )
2.6 Ghz 400 FSB
1 Gb 2100 DDR Memory
20 Gb hard drive 7,200
Windows XP Home - SP-2
Leadtek 6600 GT ( AGP ) video
48xCDRW
17 LCD ( 1703 FP )
250 watt power supply